Why does only one of my vents blow cold air?
This situation can be caused by a bad blend door (also called air mix) actuator, a broken or binding blend/air mix door, broken linkage to the blend/air mix door, or a faulty HVAC control head or wiring harness.
Why is my Honda Accord air conditioner not blowing cold?
Conclusion: A/C Not Blowing Cold Honda Accord Most of the time, when your Accord’s air isn’t blowing cold enough, it is going to be a lack of refrigerant causing the problem. We recommend having a professional recharge your A/C if it does end up being a coolant issue. If you put too much coolant into the system, you can really do some damage.
What to do if your Honda Accord air vent is stuck?
Running a self-diagnosis can help identify the problem. To diagnose the problem, press the MODE (VENT/FLOOR) button several times. The LED should flash on and off as you press the button. Turn the ignition and the fan switch to the “OFF” position. Set the temperature control dial on Max Cool. Push the mode control button and select Vent.
Where is the blower resistor on a Honda Accord?
Locate the blower motor resistor. It is underneath the glove box. You will see a brown plug and several blue connections coming out of it. Push on the tab, and pull plug out of the resistor. Use a Phillips screwdriver to unscrew the two mounting screws. The resistor should fall right out.
Where is the mode control motor on a Honda Accord?
Locate the mode control motor. The mode control motor changes how air travels through the system, depending on which mode you’ve selected. It is on the driver’s side under the instrument panel, and on the left of the heater case. The blower motor is on the right of the heater case. The mode control motor should be parallel to the left fender.
Why is my Honda Accord not blowing cold?
Blend Door – The blend door controls how much air conditioned and heated air enters the cabin. If it gets jammed or locks up, your Accord can’t respond to your temperature change request. These are a few of the most common issues that could cause your Accord to not blow cold enough. There are other issues that can cause this as well.
Running a self-diagnosis can help identify the problem. To diagnose the problem, press the MODE (VENT/FLOOR) button several times. The LED should flash on and off as you press the button. Turn the ignition and the fan switch to the “OFF” position. Set the temperature control dial on Max Cool. Push the mode control button and select Vent.
Why does my car AC blow cold air on one side?
If the car AC blows cold air on one side and hot on the other, there are a few different causes but it’s likely the blend door actuator, also known as the temperature blend door actuator or vent mode door actuator
What was the problem with my Honda Accord in 2007?
Answering the original question, how to fix cold air or hot air coming out of vents, even when the setting is the opposite. I had the problem on my ’07 Accord, dual temp controls in the EX-L. The problem is with the “air doors” that control the hot/cold air mix flowing into the cabin.