Where to put the sprocket on a Mazda B2600?
Keeping the dowel pin hole on the camshaft in a vertical position, install the camshaft sprocket and chain on the camshaft. The sprocket timing mark and the plated chain link should be at the 2-3 o’clock position when correctly installed. The chain must be aligned in the right and left chain guides with the tensioner pushing against the chain.
How to install timing gear on Mazda B2600?
Tighten the bolts to 69-95 inch lbs. (8-11 Nm). Move the adjuster sleeve towards the left and install a pin to hold it in place. Install the timing gear sprocket and chain. With the timing mark on the sprocket at the 6 o’clock position, the white links on the chain should be on either side of the mark.
What to do after rebiulding a Mazda B2600?
Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used. Remove the timing case cover. Remove the balancer chain and sprockets. Remove the crankshaft and camshaft sprockets and the timing chain.
How to tighten the chain on a Mazda B2600?
Tighten Bottom (B) chain guide securely. Adjust the position of the Top (B) chain guide, after shaking the right and left sprockets to collect any chain slack, so that when the chain is moved toward the center, the clearance between the chain guide anmd the chain links will be approximately 3.5mm (0.13779 inch).
Keeping the dowel pin hole on the camshaft in a vertical position, install the camshaft sprocket and chain on the camshaft. The sprocket timing mark and the plated chain link should be at the 2-3 o’clock position when correctly installed. The chain must be aligned in the right and left chain guides with the tensioner pushing against the chain.
Tighten the bolts to 69-95 inch lbs. (8-11 Nm). Move the adjuster sleeve towards the left and install a pin to hold it in place. Install the timing gear sprocket and chain. With the timing mark on the sprocket at the 6 o’clock position, the white links on the chain should be on either side of the mark.
Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used. Remove the timing case cover. Remove the balancer chain and sprockets. Remove the crankshaft and camshaft sprockets and the timing chain.
Tighten Bottom (B) chain guide securely. Adjust the position of the Top (B) chain guide, after shaking the right and left sprockets to collect any chain slack, so that when the chain is moved toward the center, the clearance between the chain guide anmd the chain links will be approximately 3.5mm (0.13779 inch).