When is the p1148 Nissan code detected?
Most auto repairs shops charge between $75 and $150 per hour. When is the P1148 NISSAN code detected? The closed loop control function for bank 1 does not operate even when vehicle is driving in the specified condition, the closed loop control function for bank 2 does not operate even when vehicle is driving in the specified condition.
What does the code p0031 mean on a Nissan?
Check for damaged components and look for broken, bent, pushed out, or corroded terminals. The code means that there is a problem with the heater element circuit of the heated oxygen sensor. Water getting inside the heated oxygen sensor connector can caused the heated oxygen sensor fuse to blow, which is a very common problem for this type codes.
What can cause a p1148 to go bad?
There are far too many possible causes of P1148 to list them all here, but as a general rule, problems such as damaged, burnt, shorted, disconnected, or corroded wiring and connectors form the bulk of possible causes. Other possibilities could include-. Defective air/fuel ratio sensors.
When does the PCM set the code p1148?
When this happens, the PCM sets code P1148, and illuminates a warning light. Note that on Nissan/Infiniti applications, this code is set on the first fault cycle.
What are the p1148 and p0031 codes?
Last night, I got the code reader out and got 2 codes (P1148 and P0031). P1148 is a Closed Loop Control Function in Bank 1. I would Imagine these two are related.
Most auto repairs shops charge between $75 and $150 per hour. When is the P1148 NISSAN code detected? The closed loop control function for bank 1 does not operate even when vehicle is driving in the specified condition, the closed loop control function for bank 2 does not operate even when vehicle is driving in the specified condition.
What does p1148 do in bank 1 Nissan Versa?
P1148 is a Closed Loop Control Function in Bank 1. I would Imagine these two are related. I did book an appointment at Nissan, for Friday, before I had access to a code reader, But I would like to try and do it on my own if it were possible. I would imagine I need to replace the Heated Oxygen Sensor.
What does it mean when your heater code is p0031?
Although it functions most effectively when the exhaust gas temperature isn’t too low, most have a heater to ensure accurate air/fuel readings. This heater plays a major role in the overall efficiency of your engine, particularly in cooler climates. When you receive trouble code P0031, the heater for this sensor has a low resistance reading.
What does closed loop control function p1148 mean?
The closed loop control function for bank 1 does not operate even when vehicle is driving in the specified condition, the closed loop control function for bank 2 does not operate even when vehicle is driving in the specified condition. P1148 NISSAN Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) P1148 NISSAN Meaning
P1148 is a Closed Loop Control Function in Bank 1. I would Imagine these two are related. I did book an appointment at Nissan, for Friday, before I had access to a code reader, But I would like to try and do it on my own if it were possible. I would imagine I need to replace the Heated Oxygen Sensor.
Last night, I got the code reader out and got 2 codes (P1148 and P0031). P1148 is a Closed Loop Control Function in Bank 1. I would Imagine these two are related.
What is the p1148 function in bank 1?
P1148 is a Closed Loop Control Function in Bank 1. I would Imagine these two are related. I did book an appointment at Nissan, for Friday, before I had access to a code reader, But I would like to try and do it on my own if it were possible. I would imagine I need to replace the Heated Oxygen Sensor. Your input would be greatly appreciated!
What does the p1148 Nissan ECM code mean?
P1148 NISSAN Meaning. The Engine Control Module (ECM) performs ON/OFF duty control of the Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 heater corresponding to the engine operating condition to keep the temperature of Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 element at the specified range.
What is the OBD 2 fault code p1148?
OBD II fault code P1148 is a manufacturer specific code that is defined by car makers Nissan and Infinity as “Closed Loop Control Function Bank 1”, and on these applications, code P1148 is set when the PCM (Powertrain Control Module) detects a condition relating to an air/fuel ratio sensor that prevents it (the PCM) from entering closed loop
What causes a Nissan P1168 to malfunction?
P1168 NISSAN Possible Causes For Models 2005 and up: Faulty Air Fuel Ratio Sensor 1 Bank 2 Air Fuel Ratio Sensor 1 Bank 2 harness is open or shorted Air Fuel Ratio Sensor 1 Bank 2 circuit poor electrical connection For Models before 2005: Faulty Heated Oxygen Sensor 1 Bank 2
How much does it cost to repair a p1148 Nissan?
The cost of diagnosing the P1148 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P1148 NISSAN code detected?
The closed loop control function for bank 1 does not operate even when vehicle is driving in the specified condition, the closed loop control function for bank 2 does not operate even when vehicle is driving in the specified condition. P1148 NISSAN Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) P1148 NISSAN Meaning
There are far too many possible causes of P1148 to list them all here, but as a general rule, problems such as damaged, burnt, shorted, disconnected, or corroded wiring and connectors form the bulk of possible causes. Other possibilities could include-. Defective air/fuel ratio sensors.
What are symptoms of Nissan OBDII engine light not working?
The closed loop control function for bank 1 does not operate even when vehicle is driving in the specified condition, the closed loop control function for bank 2 does not operate even when vehicle is driving in the specified condition. Possible symptoms. P1148 Nissan Description.
What is the trouble code for a Nissan Quest?
There is a Service Bulletin issued by Nissan regarding Trouble Code P1148 and P1031 for the Nissan Quest which we’ve attached a copy of below. The Service Bulletin requires the reprogramming of your Nissan Quest’s ECM, to be performed by a certified Nissan technician.
When this happens, the PCM sets code P1148, and illuminates a warning light. Note that on Nissan/Infiniti applications, this code is set on the first fault cycle.
Where do I find the trouble code on my Nissan?
On all models, to erase DTCs using generic scan tool (GST), select mode 4. Place diagnostic switch in the Off position. Place ignition switch in the On position. Crank engine. Start and operate engine. The trouble codes will be displayed by the flashing Engine Control Lamp and the Overheat Warning Lamp and the Overheat Warning Buzzer.
How long does it take for a Nissan OBD code to appear?
For example, a code 12 will be displayed by the check engine lamp flashing 1 time for approximately 1.2 seconds, followed by a .6 second pause, then 2 short flashes. Each trouble code will be displayed 3 times before the next trouble code is displayed.
What is the diagnostic code for a Nissan check engine light?
Follow scan tool manufacturer’s operating instructions to access the Diagnostic Trouble Codes (DTC’s). Remember, these are manufacturer specific codes only. Refer to our Generic OBD II code listfor definitions on all other Nissan diagnostic trouble codes. Manufacturer Specific Codes P1105MAP/BARO Pressure Switch Solenoid Valve
What does the P1168 code on a Nissan mean?
P1168 NISSAN Meaning The Engine Control Module ( ECM ) performs ON/OFF duty control of the Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 heater corresponding to the engine operating condition to keep the temperature of Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 element at the specified range.
When does engine light come on code p1198?
When you check engine light came on code P1198the reason should be Engine Light ON (or Service Engine Soon Warning Light). However your vehicle’s manufacturer may have a different definition for the P1198 OBD-II Diagnostic Powertrain (P) Trouble Code. So you should chech it on our car models.
What does the code p1198 DTC stand for?
P1198 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is over-retarded, the engine light will be illluminated and the code will be set.