What year did the Yamaha r1 get fuel injection?
2002
A new fuel injection system was introduced for the 2002 year, which worked like a carburetor by employing a CV carburetor slide controlled by vacuum created by the engine. With a similar power output to the 2000-2001 bike, the engine remained largely the same.
What causes the fuel pump to not start?
The fuel pump is running and delivering normal pressure to the engine But, with all that working your engine still will not start. So, the most likely cause, is that the fuel injectors are probably not opening. The (PCM) uses the trigger signal from the crankshaft position sensor; and/or camshaft position sensor to pulse the injectors.
Why is my injector pulse not working on my car?
Ans: Having a stuck or clogged injector is a very wide known problem that happens because of the accumulation of carbon build-ups that coming out from using a low-grade fuel, so regularly using a fuel system cleaner can help you in this mission.
What causes no power to fuel injectors?
The most important signals that determine the accuracy of a signal coming out of ECU to injectors are crankshaft position sensor and camshaft position sensor, so to test a bad injector, you have to check the voltage on the injector when the ignition key is turned on: NO VOLTAGE? , so what causes no power to fuel injectors?
What should fuel pressure be when no Buzz?
Fuel pressure is typically in the 35 to 45 psi range. If your Anti-Theft light is flashing; the anti-theft system is disabling the fuel pump to prevent the engine from starting. Bad fuel pump (Pump should run for a few seconds when ignition key is turned to start, no buzz means no fuel delivery to the engine).
Why do I have a problem with my fuel injection pump?
Fuel injection problems, therefore, are one of the most pressing engine issues to deal with. Whether you’ve experienced fuel injector failure or not, it helps to understand the fuel injector pump, how it relates to engine performance, and also how diesel fuel injection pumps differ from traditional gasoline-powered units.
Ans: Having a stuck or clogged injector is a very wide known problem that happens because of the accumulation of carbon build-ups that coming out from using a low-grade fuel, so regularly using a fuel system cleaner can help you in this mission.
What happens if the fuel injector doesn’t close?
If the injector can’t close, cylinder performance is compromised. Whenever the fuel injector pump’s O-rings or ball seats are defective, the timing of the fuel transfer process is disrupted. This is a common diesel fuel injector pump glitch, and usually requires a complete injection pump rebuild or replacement.
What’s the pressure of a diesel injector pump?
Today’s diesel fuel injection pumps are under pressure – even more pressure than what was once considered “normal.” Around 15-20 years ago, it was common for fuel injector pumps to process fuel in a system at around 10,000 to 15,000 psi (pounds per square inch). But that’s only about half of what engines are expected to do today.