What would cause a tire to have a feathering wear?
Feather edge tire wear: Tires are “feathered” when the tread ribs are worn lower/smoother on one side and higher/sharper on the other. This is often caused by a combination of improper alignment settings, such as excessive toe and caster.
Can you fix a feathered tire?
Causes of Tire Feathering One common cause is bad wheel alignment. Resolving the problem may be as simple as realigning the wheels or tightening up parts in the suspension system. It may require replacing the shocks or struts, but doesn’t necessarily mean that you will have to replace the tires.
Will feathered tires cause vibration?
Toe misalignment or caster will cause feathering or cupping of the tire tread. This type of damage will be evident upon inspection. Finally, a weak or blown shock will cause cupping of the tire tread and be felt as vibration at all speeds, some worse than others.
How long can you drive with bad ball joints?
short answer is… it depends on how bad they are. the lower ball joint typically gets more wear than the upper. i’d say, if there’s just a little wiggle in either joint, you should have no problem driving 500 miles.
How does tire pressure warning work on Toyota Tundra?
The 2006 Toyota Tundra uses a tire pressure warning system to warn a driver when tire pressure of any one of the tires is reduced. The system also monitors the pressure in the spare tire.
Why are the treads on my tires feathering?
To understand if feathering is a problem for your tires, it’s easier to feel it than see it. Feathering describes angled wear; the treads that are worn and rounded on one side and sharp on the opposite side. One common cause is bad wheel alignment.
When to reset the tire indicator light on 2006 Toyota Tundra?
The system also monitors the pressure in the spare tire. When tires are replaced, rotated or if air is added to any of the tires, the system must be reset. Resetting the system allows the Tundra to accurately measure the air pressure in all of the tires. The warning light will turn off when the system is reset. Insert the key into the ignition.
Where is the set button on a Toyota Tundra?
Press and hold the “SET” button. The button is directly below the steering column. Release the “SET” button when the tire indicator light turns off. Turn the ignition to the “OFF” position. David Clair began writing for websites in 2001, creating online marketing content for business owners.