What transmission fluid does an AW4 take?
The owner’s manual and the Chrysler service manual both say to use Mopar Dexron IIE/Mercon fluid for the automatic AW4 transmission.
How much fluid does an AW4 transmission hold?
Used about 13 quarts.
What is dexron III?
ATF Dexron-III is a premium automatic transmission fluid specially formulated to meet the needs of today’s more compact transmissions, running at higher operating temperatures and with electronic control.
What kind of transmission fluid does a Jeep Cherokee use?
“Mopar automatic transmission fluid or equivalent labeled dexron III of mercon. from other research it shows from 1987-2001 for the 4.0L they used the Aisin warner AW-4 4 speed transmission. I guess thats what i have. Now what do i do? haha. some people say they are close and compatible.
Is the AW4 transmission on the Jeep XJ Cherokee?
Diagnosis of faults in the Jeep AW4 transmission. The automatic transmission used in the Jeep XJ Cherokee is nearly bullet proof. Seldom does it ever give trouble.
How does the torque converter work on a jeep AW4?
Normally, the transmission with switch to 2nd at 20 to 25 mph depending on the TPS signal. It gets its speed reference from the internal speed sensor so if you are in low range, the speed will be different. In the 1-2 position, the torque converter can lock up in first or second gear. In 3 or D it will only lock in 3 or four.
Why is my AW4 transmission not working at 25 mph?
The harness passes right behind the transfer case shift linkage and can be damaged by the linkage if it is moved around by a transfer case drop or something like that. Normally, the transmission with switch to 2nd at 20 to 25 mph depending on the TPS signal.
“Mopar automatic transmission fluid or equivalent labeled dexron III of mercon. from other research it shows from 1987-2001 for the 4.0L they used the Aisin warner AW-4 4 speed transmission. I guess thats what i have. Now what do i do? haha. some people say they are close and compatible.
When did Jeep stop using the AW4 transmission?
Greg, a DCX tech, wrote that the AW4/AX4 transmission was used on 6-cylinder Jeep Cherokees through the end of production, and on the first six-cylinder 1993 Grand Cherokees (built in 1992 and 1993), but on the Grand Cherokee it was phased out midway through the 1993 model year.
Is the AW4 transmission compatible with a 4.0L engine?
The AW4 is an electronically controlled transmission, and is therefore compatible only with the 4.0L engine and its PCM package. We do not offer any conversion from this transmission to V6 or V8 power.
What kind of transmission does a Jeep Comanche use?
The Aisin Warner AW4 transmission is an automatic shift, four-speed overdrive transmission used in the 1987-2001 Jeep XJ Cherokee and MJ Comanche models.