What tools do I need to change the brakes on a Toyota Camry?
The tools required to complete this procedure include a floor jack, jack stands, a lug nut wrench, a 14mm socket, a thin 17mm cone spanner wrench, a “C” or “F” clamp, and a packet of brake parts lubricant or “brake caliper grease”.
What tools do you need to change front brakes?
Tools Required
- Disposable mechanic’s gloves to protect your hands and keep them clean.
- Jack and jack stands.
- Lug wrench.
- C-clamp or length of wood to retract the piston.
- Wrench (choose a socket, open end or adjustable wrench)
- Turkey baster for drawing out brake fluid.
- Plastic tie, bungee cord or piece of string.
What size tools do I need to change brake pads?
You at least need a set of 3/8″ (drive size) sockets set with sizes 8-19mm. Some vehicles use Allen or Torx bits for the caliper guide pins. Torx and Allen bits are not interchangeable.
How much are rotors for a Toyota Camry?
How much are rotors for a Toyota Camry. The cost of rotors by themselves usually run anywhere between $50 to $125 per rotor retail depending on the type of rotor and whether or not you want to install them yourself. Some ultra-luxury vehicle rotors often cost over $300 per rotor.
What tools do I need to change my brake pads and rotors?
What Tools Do You Need To Change Brake Pads and Rotors?
- Ratchet and Socket Kit. To fix your vehicle, you must have a socket set.
- Torque Wrench. A torque wrench is a must.
- Brake Pad Spreader or C-Clamp.
- Torx / Allen Set.
- Brake Bleeder Wrench.
- Jack and Jack stands.
- Lug Nut Wrench.
- Gloves.
How much do new brakes cost Toyota Camry?
Toyota Camry brake pads replacement, which includes parts and labor, can cost anywhere between $150 and $300 per axle depending on the type of brake pads desired and the extent of the damage your previously worn down pads have caused to the other components of your vehicle such as the rotors.
How do you install new brake pads on a Toyota Camry?
Install the brake caliper in place over the new brake pads. Tighten the front caliper bolts to approximately 25 ft/lbs, and the rear caliper bolts to 15 ft/lbs. If a new brake caliper was installed, attach the brake hose to the caliper. Be sure to use new copper crush washers between the brake hose and banjo bolt.
How do you remove the rotor from a Toyota Camry?
Two 14mm bolts need to be removed to release the caliper bracket. The brake pads can be taken out at this point. Make sure the surface of the brake pads stays clean so it maintains its stopping power. The rotor can now be removed from the hub as well. Figure 2. Remove caliper bracket. Figure 3. Brake pad removal. Figure 4. Rotor removal.
What kind of brakes does a 2002 Camry have?
So, here’s a little step by step of a complete front brake job on a 2002 Camry 2.4L with 165K miles. The front brakes were worked on by Firestone 6 years ago with Wagner Thermoquite pads.
How big should the brake bolts be on a Toyota Camry?
Tighten the front caliper bolts to approximately 25 ft/lbs, and the rear caliper bolts to 15 ft/lbs. If a new brake caliper was installed, attach the brake hose to the caliper.