What to check before replacing an alternator in a car?
It’s time to get out your voltmeter and check for voltage drop in the battery and charging circuit. When a new alternator is installed, check the battery voltage and use a battery charger to bring the battery up to full charge before you return the vehicle to your customer.
What happens when the alternator dies on a car?
Because the alternator supplies current to the vehicle’s electrical systems, this is where you’ll notice most that something is amiss. Dead Battery: Your car battery will die without a working alternator to keep it charged. If your battery dies, you should test the battery (free at AutoZone).
Do you need tensioner to replace alternator in car?
Automotive designs vary greatly from car to car. You may need something else, and many cars won’t need the last two items to get the job done, although some do. It all depends on how your make and model was made. If you don’t have a tensioner tool, borrow one from us through the AutoZone Loan-A-Tool program.
How do you remove a nut from an alternator?
Use a socket or wrench to remove the nut by turning it counterclockwise. After the nut has been removed grasp the main power cable and lift it from the alternator charge terminal. Locate the control and monitoring wiring harness connector. Grasp the dust boot and pull it back enough to access the connector safety clip.
How much does it cost to replace an alternator in a car?
If you have an awesome audio system, odds are you’ll need a more expensive alternator that puts out more amperage for your car’s electrical needs. In general, expect $130 to $250 for a quality alternator.
What did I do when my alternator died?
I was driving on the freeway and my car started to make a weird noise. Pulled over to the next lane for the next exit. It automatically died and locked up. I kicked it in neutral and forced it onto the shoulder. Roughly a week or two before that I replaced the alternator and it was running great.
Can you drive a car with a faulty alternator?
Faulty diodes can easily be replaced, but you will need to dismantle the alternator. It is impossible to drive the car with a faulty alternator. While it is the work of the battery to power the electrical components in the car, it cannot do this alone.
How can I tell if I have an alternator problem?
To differentiate an alternator problem from the battery, you will need to use a voltmeter to check for voltage. First, turn off the engine and check the battery voltage. A fully charged battery should have a reading of 12.65 volts. Next, turn on the engine and recheck the voltage. You should have a reading of 13.5 to 14.5 volts.