What size bearing is L44649?
1.249 Inches
Product Description
| Bearing Number | Race Number | Seal Size |
|---|---|---|
| L44649 (2 psc, matches L44610 race) | L44610 (2 psc, matches L44649 bearing) | 1.249 Inches |
What seal goes with L44649 bearing?
The seal part most often used with inner/outer bearing L44649 is seal part # 10-9 which has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches so bearing kit # BK1-150 that you referenced should do it.
How much does it cost to repack a travel trailer bearing?
Some Class A RV owners have stated that it cost anything from $300 to $500 to replace the bearings. Depending on how much you use your trailer and how many miles you get on it, you can wait till about 20,000 miles before your wheel bearing has to be repacked.
What bearing goes with L44610?
etrailer Trailer Bearings Races Seals Caps – L44610 Works with L44643 and L44649 bearings.
What is #84 spindle?
A #84 spindle, like # TRU24FR or # TRU47FR is bigger and is used for 3,500 lb axles. Common sizes for these are 2-3/8 inch round axle, 3 inch round axle, and 2 inch square axle.
What race goes with L68149?
The # L68149 inner bearing is paired with the # L44649 outer bearing which takes a # L44610 race. You could also order the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal, # BK2-100, if the race mentioned above is the correct part for your application.
What is a BTR spindle?
The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063″ diameter L44649 bearing and the BT8 spindle uses a 0.99″ diameter L44643 bearing. If you have BTR spindles then you can use part # AKIHUB-440-2-2K.
How do I know if my trailer bearings are good?
Support the trailer with jack stands and then spin the wheel and listen to the trailer bearings. If the wheel spins freely and quietly, proceed with repacking the bearings. If you hear friction or a growling sound, you most likely have a bad bearing or spindle.
How do I know what trailer bearings to buy?
The easiest way to determine which bearings are used on your trailer axle is to take the hub off and check for the numbers stamped into the bearings. If the bearing numbers cannot be read, the next best solution is to find the bearings’ inner diameter.
How do I know if my trailer wheel bearings are bad?
Check for Heat – Tow the trailer for a short distance, 5-10 miles at highways speeds, then park the trailer. Place your hand on each of the wheel hubs of the trailer. If it is too warm to hold your hand in place, you may have a bad bearing. The wheel bearing may; require lubrication, be bad or not have enough play.
Where can I get a replacement trailer bearing?
Replacement part uses industry-standard number. Lowest Prices for the best trailer bearings races seals caps from etrailer. Replacement Trailer Hub Bearing – L44649 part number L44649 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
How big is the hub bearing on an etrailer trailer?
Replacement Trailer Hub Bearing – L44649 etrailer Trailer Bearings Races Seals Caps L44649. 1 1.063 Inch I.D. 2 1.063 Inch I.D. 3 1.250 Inch I.D. Bearing 14125A Race 14276 5200 lbs Axle 6000 lbs Axle 7000 lbs Axle. High-quality, tapered roller bearing is designed for high-speed
How big is a Timken modal window bearing?
2.4 x 2.3 x 0.9 inches L44649 L44649 3110-00-926-1379 Would you like to tell us about a lower price? Video Player is loading. This is a modal window. Timken Bearings are designed to maintain proper oil clearance, allowing a thin film of oil to form between the moving parts of the vehicle.
https://www.youtube.com/watch?v=aHxrjTSM_GU