What oil does a Suzuki Boulevard M50 take?
Suzuki ECSTAR R9000 10W-40 Full Synthetic Oil Change Kit for Suzuki Boulevard M50 VZ800 2005-2009.
How do you check the oil on a Suzuki Boulevard M50?
The dipstick is located on the left side of the bike when you are sitting on it, tucked just under the cylinder. Wipe the oil off the dipstick with a rag. Reinsert the dipstick in the block without tightening it. Pull the dipstick out and check the oil level according to the webbed portion.
How do you change the oil on a Suzuki Boulevard m50?
Instructions
- Step 1: With a warm engine, remove the drain plug.
- Step 2: While the oil drains, remove the oil filler cap.
- Step 3: Remove the oil filter.
- Step 4: Set your torque wrench to 20 Nm.
- Step 5: Oil the new oil filter’s o-ring.
- Step 6: Install the new oil filter.
- Step 7: Install drain plug and pour in oil.
- Test your work.
Can you change the oil on a Suzuki Boulevard M50?
One great thing about doing an oil change on a Suzuki Boulevard M50 / C50 is that the motorcycle has an oil fill screen on the left side of the engine. I strongly recommend measuring how much you’re pouring in though.
How big is the oil filter on a Suzuki Boulevard?
Oil filter torque: 20 N·m, 2.0 kgf-m, 14.5 lb-ft) or “after contacting the O-ring, tighten 2 turns.” All specs are taken from the Suzuki Boulevard M50 service manual from Emanual Online, please check them out if you’re in need of service manuals for your vehicles, and thank you, Alec!
Where is the oil filler cap on a Suzuki M50?
The oil filler cap is on the left side of your motor, it’s where you’ll be pouring new oil into. Take it off while your oil drains out of your Suzuki. Grab your oil filter wrench and remove your oil filter.
What kind of oil does a Boulevard C50 use?
I went to our local Suzuki dealership, picked up some 20w50 and a new filter and changed it out just this afternoon. I think with our overly warm temps and high humidity – the 10W40 was (in my opinion) a bit too thin for my taste. The thicker oil quieted up some of the sewing machine chatter, too – which is nice.
One great thing about doing an oil change on a Suzuki Boulevard M50 / C50 is that the motorcycle has an oil fill screen on the left side of the engine. I strongly recommend measuring how much you’re pouring in though.
The oil filler cap is on the left side of your motor, it’s where you’ll be pouring new oil into. Take it off while your oil drains out of your Suzuki. Grab your oil filter wrench and remove your oil filter.
Oil filter torque: 20 N·m, 2.0 kgf-m, 14.5 lb-ft) or “after contacting the O-ring, tighten 2 turns.” All specs are taken from the Suzuki Boulevard M50 service manual from Emanual Online, please check them out if you’re in need of service manuals for your vehicles, and thank you, Alec!
How do you change the oil on a Suzuki?
Take it off while your oil drains out of your Suzuki. Grab your oil filter wrench and remove your oil filter. It’ll be hard at first and then ease up. It will take a while for all of your oil to slowly leak out, so after you do this be sure to take your dog for a nice long walk. If you don’t have a dog, borrow one from a neighbor.