What offset for Subaru Forester?
Subaru Forester Wheel Offset
Stock wheel offset | 38 to 53 mm Try Wheel Spacers |
---|---|
Custom Offset Range | 45 to 45 mm |
Center bore (hub bore) | 56.1 Use Hub Centric Rings |
Thread Diameter | M12 x 1.25 Lug Nuts |
Stock Rim Sizes Range | 16×6.5 – 19×8.5 Hubcaps |
Can I use different wheel offset?
If the new wheels are the same width, the new offset should ideally be within 5mm of the old offset in either direction. If offset must be substantially different, avoid using more positive offset at all costs. If the new wheels are wider, backspacing must be calculated.
How do I know what wheel offset I need?
More commonly, you must worry if the offset is positive or negative. If the wheel offset is positive, the wheel mounting surface is towards the front of the wheel, forward of the centerline. If the wheel offset is negative, the mounting surface is to the back of the centerline of the wheel.
What size tires can I put on my Forester?
The 29 inch tires are a tight fit, but they can be put on a stock Forester even without a lift kit. If you want to size up even further to a 29.5 inch tire, you’ll need to be ready to trim or remove front mud-flaps, make small cuts to the body trim, and use a heat gun on fender liners.
Is 5 mm offset a big difference?
Removing 5mm of offset usually is not a big deal if the rim/tire width is the same. Adding offset pushes your wheels in, which means you have to worry about rubbing your suspension.
Does negative offset stick out more?
A negative offset gives an inset or deep-dish look: -44 is deeper than -12. The wheel will also stick out from the truck. Keep in mind that some states require fender flares to cover the width of the wheel and tire.
Does higher offset stick out more?
Typically expressed in millimeters, offset refers to the distance between the wheel’s mounting hub and the center line of the wheel. When bolted up to your car this means that a lower offset wheel will stick out farther.
What’s the wheel offset on a 2004 Subaru Forester?
I drive a 2004 xt and have found a set of 17×7.5 wheels with a +38 offset and a 5×100 bolt pattern wrapped in 205 40R17 tires. The million dollar question is whether they will work on my car. Any advice is good advice at this point.
How to find the correct tire size for a Subaru Forester?
Subaru Forester – Find out the correct alloy wheel fitment, PCD, offset and such specs as bolt pattern, thread size(THD), center bore(CB) for all model years of Subaru Forester. Choose a model year to begin narrowing down the correct tire size Wheel-Size.com
What causes wheel squirm on a Subaru Forester?
The point where the steering axis (sai) line contacts the road is the fulcrum pivot point on which the tire is turned. Squirm occurs when the scrub radius is at zero. When the pivot point is in the exact center of the tire footprint, this causes scrubbing action in opposite directions when the wheels are turned.
What’s the scrub radius on a Subaru Forester?
If the steering centerline is inboard of the tire centerline, the scrub radius is positive. If the steering centerline is outboard of the tire centerline, the scrub radius is negative.