What is the size of baton in relay race?
The relay baton shall be a smooth hollow tube, circular in section, made of wood, metal or any other rigid material in one piece, the length of which shall be 280 to 300mm. The outside diameter shall be 40mm (±2mm) and it shall not weigh less than 50g.
What is a relay baton made of?
Relay batons can be made from aluminium or plastic. Although both can be used in competition, aluminium being the more traditional style remains the most popular. The plastic relay batons are the preferred choice for most Junior Sportsday relay races.
What are the two types of baton passes in relay?
Upsweep, Down-sweep or Push Pass?
- Up-sweep – The incoming runner passes the baton up into the outgoing runner’s hand.
- Downsweep – Receiving arm extended, but hand level is just above hip height.
- Push Pass – the arm is extended out parallel to the ground and the hand is open with the thumb pointing down.
What is relay batons?
The baton, a hollow cylinder of wood or plastic, was introduced in 1893. It is carried by the runner and must be exchanged between lines drawn at right angles to the side of the track 10 metres or 11 yards on each side of the starting line for each leg of the relay.
What is the maximum weight of baton?
Most batons are between 14 to 32 inches (35.5 to 81.5 cm) in length and are either 3/8 inch (10 mm), 5/16 inch (8 mm), or 7/16 inch (11 mm) in diameter. The normal standard baton weighs about 8 ounces (or 227 grams) – the length and diameter do also factor into the weight.
What is baton and its size?
Batons have normally varied in length from about 10 to 24 inches (250 to 610 mm) though a range of between 12 and 26 inches (300 and 660 mm) is more commonly used; Henry Wood once requested the use of a 24-inch baton.
What are the different types of baton exchange?
There are three types of non-visual exchanges — the upsweep, downsweep, and push, so make sure you’re comfortable with them all! Next, you’ve got the downsweep and now the runner will flip their palm upwards to receive the baton.
What is Upsweep baton exchange?
The “upsweep” involves the incoming athlete passing the baton upward into the receiving hand. This is a good method for receiving as the hand is in a natural position, but it means that the baton will need to be manipulated before the next handover and this can be difficult for young athletes.
What is the use of relay baton?
At the Olympics and other World Athletics-sanctioned tournaments, a relay race is an event where a team of four athletes run equal predetermined distances in a sprint race, each passing a rod-like object called the ‘baton’ to the next person to continue the race. The last runner in a relay is called the ‘anchor’.
What is the shape of the relay baton?
Shuttle Relay – the baton is held vertically at the bottom. It is received at chest level with the receiver’s arms outstretched and their hands creating the shape of a butterfly.
What is the ideal size of baton?
14 and 32 inches
If your baton is too long, it can end up hitting your body (and that can really hurt). The perfect length will make your performance look effortless and smooth. Batons tend to be between the sizes of 14 and 32 inches.