What is the fuel pressure on a Jeep Grand Cherokee?
If either sensor indicates no engine RPMs, the PCM will not activate the fuel pump relay past the 1-3 seconds initial run time. Key On Engine Running: 31 PSI (2.2kg/cm²). Key On Engine Off: 39-41 PSI (2.7-2.9kg/cm²). Key On Engine Running (but no vacuum applied to fuel pressure regulator): 39-41 PSI (2.7-2.9kg/cm²).
Where does the fuel pump go in a Jeep Grand Cherokee?
1993, 1994, 1995 4.0L Jeep Grand Cherokee. Fuel pump troubleshooting notes: The fuel pump relay gets power from fuse #6 (15 Amp) of the Power Distribution Center (PDC). The PCM activates the fuel pump relay and the auto shut down (ASD) relay at the exact same time and thru’ the same circuit (PNK wire).
What to do if your Jeep Cherokee stops running?
If the Jeep Cherokee has stopped running or will not start and you feel that the fuel pump has failed, then this is the proper way of diagnosing the problem before replacing an item that may not be needed. Starting from the basics, take off the fuel cap and listen closely for the fuel pump to come on as a helper turns on the ignition key.
Why does my Jeep stall when I start the engine?
If it starts, the fuel pump is the problem. If not, the engine should be checked for spark. It could be a sensor or computer-related problem. To be absolutely sure, raise and support the back of the Jeep on jack stands, unless the height allows you to crawl under the back without raising it.
If either sensor indicates no engine RPMs, the PCM will not activate the fuel pump relay past the 1-3 seconds initial run time. Key On Engine Running: 31 PSI (2.2kg/cm²). Key On Engine Off: 39-41 PSI (2.7-2.9kg/cm²). Key On Engine Running (but no vacuum applied to fuel pressure regulator): 39-41 PSI (2.7-2.9kg/cm²).
1993, 1994, 1995 4.0L Jeep Grand Cherokee. Fuel pump troubleshooting notes: The fuel pump relay gets power from fuse #6 (15 Amp) of the Power Distribution Center (PDC). The PCM activates the fuel pump relay and the auto shut down (ASD) relay at the exact same time and thru’ the same circuit (PNK wire).
Is the Jeep Grand Cherokee 4.0 6 cyl fixed?
Although I’m withholding final judgement–the beast is fixed! Anyone who knows me knows I’ve had problems with my 1995 Jeep Grand Cherokee Laredo 4.0 6-cyl for what seems like ages. It’s been having issues (well, one issue in particular) since at least fall of last year.
How long has my Jeep Grand Cherokee been having issues?
Anyone who knows me knows I’ve had problems with my 1995 Jeep Grand Cherokee Laredo 4.0 6-cyl for what seems like ages. It’s been having issues (well, one issue in particular) since at least fall of last year. I’ve only owned the car for 5 years now, and I didn’t want to give up on it just yet–most of the time it ran great.
What kind of wiring is in a Jeep Grand Cherokee?
Auto Shut Down (ASD) Relay Wiring Diagram (1993-1995 4.0L Jeep Grand Cherokee). CMP Sensor Wiring Diagram (1993-1995 4.0L Jeep Grand Cherokee).
What kind of gas do you use in a Jeep Wrangler?
You pull up to the pump at the gas station to fill up your new Chrysler or Jeep for the first time and are wondering which type of gas you should use. You have the choice between regular, mid-grade, and premium gas.
Auto Shut Down (ASD) Relay Wiring Diagram (1993-1995 4.0L Jeep Grand Cherokee). CMP Sensor Wiring Diagram (1993-1995 4.0L Jeep Grand Cherokee).
What causes no start on a jeep 4.0L?
Updated: 29 June 2019. Article Id: 420. A no start condition, on your 4.0L Jeep, is usually caused by a lack of fuel, or a lack of spark, or a lack of air (generally engine compression).