What is a TCG blade?
Triple Chip Grind is a modification on the standard flat grind or FTG blade. TCG blades use two different types of teeth, which they alternate. One type of tooth is a standard FTG tooth. These are alternated with a modified FTG tooth which has had its corners relieved or chamfered.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
What is the purpose of the gullets?
The main function of the gullet, otherwise known as the esophagus, is to transfer food and drinks from the mouth to begin digestion in the stomach, according to University of Maryland Medical Center.
What does TCT stand for in blades?
Tungsten Carbide Tips
Tungsten Carbide Tips. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.
What is triple chip blade?
Triple Chip Grinds combines a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chip board, and laminates. This tooth design is also used on blades for cutting non-ferrous material.
What is the most common saw blade?
The 5 Most Common Saw Blade Types for Metalworking
- Carbon Hard Back. One-piece carbon steel construction; spring tempered backing with an RC of 43 – 47 (for rigidity) and a tooth RC of 64 –6.
- Carbon Flex Back.
- Bi-Metal (Matrix)
- Carbide Tipped.
- Grit Edge.
What cuts smoother a blade with a lot of small teeth or a blade with a few large teeth?
In general, blades with more teeth yield a smoother cut, and blades with fewer teeth remove material faster.
What is a bird’s gullet?
In a bird’s digestive system, the crop is an expanded, muscular pouch near the gullet or throat. It is a part of the digestive tract, essentially an enlarged part of the esophagus. As with most other organisms that have a crop, it is used to temporarily store food.
Do humans have gullets?
The oesophagus (gullet) is part of the digestive system, which is sometimes called the gastro-intestinal tract (GI tract). The oesophagus is a muscular tube. It connects your mouth to your stomach. When you swallow food, the walls of the oesophagus squeeze together (contract).
Is more teeth on a saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish. Gullets between the teeth remove chips from the work pieces.
What is a TCT triple chip blade?
Faithfull Professional Triple Chip Ground TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. This blade has triple angle ground teeth and negative rake for use with Mitre Saws and Radial Arm Saws when cutting laminates and aluminium.
What did the Mini Cooper’s stand for?
The Mini Cooper S championed the light and nimble, dispelled the ‘no substitute for cubic inches’ mantra, and redefined what constitutes a genuine performance car. And it became the ultimate underdog, the David that pulverised its bigger, more-powerful Goliath rivals in both racing and rallying.
How big is the back of a Mini Cooper?
Both the standard and S versions of the MINI Cooper have room for up to four people. Headroom measures 38.8 inches in the front seat and 37.6 inches in the back seat. Legroom is 41.7 inches in the front and 27.9 inches in the back. Shoulder room measures 50.3 inches in the front and 44.7 inches in the back.
What does the warning light mean on a Mini Cooper?
34-) It is one of the car indicators that winter mode is on. 35-) It is a warning light that measures the distance to follow by the sensors found in today’s upper class vehicles and lights up when the level of conformity is exceeded. 36-) It is a warning lamp that indicates that the specified speed has been exceeded.
What was the issue with the mini works GP?
The Cooper S Works GP was effectively the end-of-life special for BMW’s first generation of Mini. As such, a number of recall issues and known faults were ironed out by this point. With less equipment and trim – there’s not even a rear wiper – the list of things to check is generally lower, too.
What does the s stand for in Mini Cooper s?
Spot on, S doesn’t stand for anything. I was under the impression, John Cooper and a partner in crime (didnt think he had one) or whatever couldnt agree on Special or Super/Sport or summat else, anyway they couldn’t agree so just called it the Cooper S. Driving a MINI is like Making Love to a Beautiful Woman
34-) It is one of the car indicators that winter mode is on. 35-) It is a warning light that measures the distance to follow by the sensors found in today’s upper class vehicles and lights up when the level of conformity is exceeded. 36-) It is a warning lamp that indicates that the specified speed has been exceeded.
What are the body styles of a Mini Cooper?
R-type MINI Coopers are Gen1 and Gen2 only. The “R” MINI designations are: R50, R52, R53, R55, R56, R57, R58, R59, R60, R61 F-type MINI Coopers are Gen3 only. The “F” MINI designations are: F54, F55, F56, F57, F60 What are MINI Body Styles? If you’re not sure about which car you drive or would like to more specific information, search below.
What is the chassis code for a Mini Cooper?
MINI Cooper, just like BMW, uses letters and digits that categorize and refer to the vehicles chassis code. MINI uses letter codes “R” and “F”, followed with 2 digits . R-type MINI Coopers are Gen1 and Gen2 only .