What does the SRS light on my SL500 mean?

Your vehicle’s restraint systems control module sits atop the transmission tunnel, and wired to it are a device in each seat for tensionsing the seat belts in the event of an accident (“ETR ignition squib”). The fault code you have indicates there is a problem with the wiring or the “driver” seat tensioning device.

Is there a way to reset the SRS light?

You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.

What does it mean when SRS warning light stays on?

SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system. It is very unlikely that your airbags are going to deploy randomly, but the concern is that they may not deploy…

Is there a scanner that reads the SRS light?

Here is a scanner that works with Mercedes-Benz and will rear fault codes and reset the AirBag, ABS and check engine light. Our favorite scanner that for an in-depth Mercedes-Benz troubleshooting is the iCarsoft MB II. Not only does it read the SRS light (Airbag Control Unit) but also every control unit in your Mercedes-Benz.

Why is the SRS light on my SL500 not working?

The most common fault is the SRS connections under the passenger seat, all the yellow plugs and 1 each side. often just disconnecting the plugs and spraying with a non drying switch cleaner will fix the problem, but once the lamp is on the car usually has to go onto STAR or other to turn the warning off.

How can I Reset my SRS warning light?

It will tell you where the problem is and allow you to reset it once the problem is fixed. Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.

What does the SRS light mean on a Mercedes Benz?

What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.

Which is the SL500 modular library system user’s guide?

SL500 Modular Library User’s Guide StorageTek™ SL500 Modular Library System User’s Guide Part Number 96116 Revision: KA Sun Microsystems, Inc. www.sun.com Submit comments about this document at: http://www.sun.com/hwdocs/feedback StorageTekTMSL500 Modular Library System User’s Guide 96116 Revision: KA Part No. 96116 July 2008, Revision: KA

What was the year of the Mercedes SL500?

216 with everything. 2002 SL500 with everything. 2009 SL500 with everything. Apparently the connections carry so little current that it dosnt take much to loose the current through the connection.

What are the fault codes for Mercedes SRS?

Child seat:”Signal” transmission fault between front passenger seat and “Babysafe” Part E2e5 (Turn signal lamp) in module E2 (Right front headlamp unit) is defective. C1011. BAS light, play in steering column causes steering angle sensor to lose memory (?) C1401.

Where is the SRS light on a Mercedes Benz?

This is located on the lower left side of the control panel on the driver’s side of the car. Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts.

216 with everything. 2002 SL500 with everything. 2009 SL500 with everything. Apparently the connections carry so little current that it dosnt take much to loose the current through the connection.

Why does my SRS light keep going on?

Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Step 1 Install a new battery; Step 2 Reset SRS/ Airbag light. Instruction on How to Reset the SRS Light on a Mercedes Benz: 1.

Where is the SRS on a 1994 SL500?

For your 1994 SL500, the diagnostic setup is from a 16-pin plug. For your model, the Supplemental Restraint System (SRS) is read from Pin #6. In your SL500, the SRS System is one (of only two systems) that does NOT provide a DTC readout of “NO FAULT FOUND”. Make sure you READ ALL SYSTEMS’ CODES, RECORD the Codes, then RESET all CODES.

Is there a problem with my 1995 SL500?

HOWEVER, your 1995 SL500 has highly integrated controls, and faults can cascade from one system to another. IT IS IMPERATIVE that you read ALL CODES, then CLEAR the codes, and READ the CODES AGAIN. (Also, make sure your battery is properly charged.)

Where is the reset SRS light on a Mercedes Benz?

Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car.

What does Bas ESP ABS mean on a Mercedes Benz?

What does BAS ESP ABS light mean on a Mercedes-Benz? Let’s first take a look at what each of these acronyms means. BAS stands for Brake Assist System. It provides additional braking power in case of emergency situations.

What should I do if my SRS light comes on?

If you need a scanner that will also troubleshoot Transmission, ESP, ABS and any other control unit on your Mercedes-Benz, check out the iCarsoft MB II, a powerful diagnostic scanner for Mercedes-Benz cars. Want to know why the SRS light came on?

Why does the SRS light come on on my Mercedes?

We Can Fix It! In the majority of cases when the SRS light is on on your Mercedes, the fault is associated to the passenger seat pad. In the passenger seat there is an electronic pad that sensors whether the seat is occupied and therefore switches the passenger air bag on or off.

Why does the airbag warning SRS light come on?

The airbag warning SRS light could come on due to a defective Child Seat Occupancy Recognition Sensor which is installed in the passenger seat. If you had an auto mechanic diagnose the car or if you scan the airbag module yourself using Launch Creader VII Diagnostic Scanner you will find one of the following errors:

How does the SRS warning system work in a car?

SRS Warning System. The SRS system checks the operation of several components in your car such as: Airbags. Airbag control unit. Crash sensors. Emergency Tensioning Devices. Belt force limiters. Child occupancy sensor in front passenger seat.

Is it necessary to replace the SRS light on my SL500?

To correct the fault in one seat it is unnecessary to replace the connector in both seats. The repair procedure says to remove the seat. This makes soldering-in the new connector easier, but it is unnecessary. You can judge for yourself by raising the front edge of your seat with the seat controls and looking under the bottom cushion.

Where is the SRS light on the dash?

If the red SRS lamp on the dash is accompanied by the orange airbag lamp next to the transmission shifter is lit, the fault is commonly connected to the passenger seat sensor.

Navigation