What does service light mean on Volvo XC60?
When the service light comes on, that means it is time for an oil change and what ever other mileage services you are due for. After the service, you will need to manually reset the service light by following these steps below. 2014-2015 (XC60 & XC70) Turn the ignition switch to position I (ACC) Press and hold the OK button on the turn signal arm.
How to reset the service light on a Volvo?
Hold reset button until original trip counter value blinks and is redisplayed (For all vehicles 2003- a general yellow lamp will light when the reset button must be released) Hold reset button until original trip counter value blinks and is redisplayed (For all vehicles 2003- a general yellow lamp will light when the reset button must be released)
Is there ABS / anti skid light issue in Volvo XC90?
Hello, I drive a Volvo XC90 and this morning I got a service of abs/anti skid service required and anti-skid temporarily off, but my brakeswere changed 4months ago. So why is that coming up? Please help Show More
Do you need to reset service reminder on Volvo S60?
Please try again later. After changing oil and filters in your Volvo S60, V70, XC70, S80 or XC90 you can reset service reminder yourself. You don’t need diagnostic interface or expensive computer to do so. All you need to do is perform reset procedure and your Volvos maintenance reminder will be cleared.
How to service light reset in Volvo S80, V70?
Step 2. Set the odometer trip to T2; Step 3. Press and hold the trip odometer reset button (T1/T2 button in the cluster); Step 4. Turn the ignition switch to position II (press the start engine button again, until lights turns on in the cluster); Step 5.
How do you turn off the oil service light?
Turn the car key to “off” position “0”. And that’s it, your oil service light indicator light should be off. MOMENTO DE REVISIÓN RUTIN. – Spanish The instructions in this tutorial will work in the following model years, Diesel and Petrol engines: Comments are closed.
How do you reset the trip meter on a Volvo S60?
Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.