What does bh33 mean on a Freightliner truck?
But esentialy BH33 is not a fault code; this is an indication that a fault code was generated. To know what the actual error is, follow these steps: 1. Press and hold the button used to scroll through the display to reach the trip odometer-let go when the LED reads ‘diag’
How to get the bh33 error code on my truck?
Pressed and held again and the diag camp up again. I repeated multiple times and it kept cycling between “diag” and “faultb”. Turned the truck off, and tried again, I could not. Get back to the diag message. Tried with key on and off and with the engine running. Still get the bh33 message. Click to expand…
What are the ABS codes for Freightliner M2?
Freightliner Business Class M2 Fault Codes List – ABS System Troubleshooting Meritor WABCO Pneumatic Antilock Braking System (ABS) – Table of DTCs Left Front Wheel Sensor Troubleshooting (SID 001) MID SID FMI Problem Test Test Result Action 136 001 01 Incorrect sensor air gap 1. Adjust the sensor.
What should the voltage be on a Freightliner M2?
Check the AC voltage across pins 7 and 8 of the black X2 ECU connector while rotating the LF wheel 30 rpm. Voltage is 0.2 Vac or greater Sensor adjustment solved the problem. Voltage is less than 0.2 Vac Check for excessive wheel bearing end play and hub runout.
What is the code on a freight liner m2?
I have a 2012 freight liner m2 chassis , with a Cummings Diesel engine. Today when I turned the key a code displayed “bh 33”. The truck cranked fine, I drove it about 10 miles, shut it off. Turned the key back on and I got the same code, again it started fine. The truck went through its startup cycle, but then the code displayed.
What to do if your Freightliner has a trouble code?
If there are no further codes, I would make sure the fuel filter is a detroit diesel/ mercedes part. I would also check under the cab to see if there is an inline fuel filter in the plastic fuel line, and change it or eliminate it.
What kind of bulkhead does Freightliner use?
ICU3-M2. 10A. Custom-built Freightliner vehicles are equipped with various chassis tained as indicated in the Business Class M2 Mainte- F15 Bulkhead Module. Green.
What are the fault codes for the bulkhead module?
J1587 SIDs for Bulkhead Module (BHM) MID 164 SID Description Possible FMI 000 Backlighting Dimmer Switch Fault 7 001 Clutch Switch Fault 7 002 Reserved for Future Use — 003 Headlamp Switch Disagreement–Both park a 7
What are the fault codes for Freightliner M2?
Multifunction Turn Signal Switch Disagreement–Both wiper high and wiper low inputs are on. Unknown Keep Awake Fault–Modules are kept awake. Headlamp Switch Disagreement–Both park and on inputs are closed.
Where is the PDM on a Freightliner M2?
The fuse panel is located below and to . The main fuse box, also known as the power distribution module, or PDM, is located under the hood onthe left front fender just forward of the bulkhead module. View and Download Freightliner BUSINESS CLASS M2 driver manual online.