What do you need to know about keyless entry in Jeep?
With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handle, press the door handle LOCK button to lock all four doors and liftgate. • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
What do you need to know about the Jeep Grand Cherokee?
Jeep Grand Cherokee / Jeep Grand Cherokee Owners Manual / Things to know before starting your vehicle / Keyless Enter-N-Go The Passive Entry system is an enhancement to the vehicle’s Remote Keyless Entry (RKE) system and a feature of Keyless Enter-N-Go.
Where is the lock button on a jeep?
The front door handles have LOCK buttons located on the outside of the handles. With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handle, press the door handle LOCK button to lock all four doors and liftgate.
What do you need to know about Keyless Enter and go?
To select between “Unlock Driver Door 1st Press” and “Unlock All Doors 1st Press”, refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
How to reset keyless remote transmitters in Jeep Grand Cherokee?
Climb into your Jeep Grand Cherokee with your keyless remote(s) in hand and your manual ignition key. Do not close the driver’s door. Hit the “Lock” switch on your driver’s side door and insert the key into the ignition. Turn the key to the “Run” position and aim the keyless remote at the steering wheel.
What is the wiring diagram for a 1999 Jeep Grand Cherokee?
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1999-2004 Jeep Grand Cherokee . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle.
What should I use to unlock my Jeep Grand Cherokee?
NOTE *1 Use ORANGE/VIOLET for LOCK and PINK/BLACK for UNLOCK at the DRIVERS DOOR SWITCH. Use BLACK/WHITE for LOCK and PINK/BLACK for UNLOCK at the passenger front door switch. This vehicle requires (2) of part # 778 one for each door See DIAGRAM.
What is the FOB number on the back of a Jeep Grand Cherokee?
Fob Number on Back Is Purely Cosmetic Notes: 5 button, Vehicle and New Part must Be Taken to Dealer or locksmith for Key Cutting and Programming, Fobik transmitter for vehicles with remote start, FCC ID Beginning with IYZ or M3N, Uncut Key Insert is Included. User May Transfer Cut Key From original Part
What happens to the passive entry system on a jeep?
• The Passive Entry system will not operate if the RKE transmitter battery is dead. The vehicle doors can also be locked by using the RKE transmitter lock button or the lock button located on the vehicle’s interior door panel.
Is there a button to unlock a jeep?
If you don’t have the $495 remote proximity keyless entry, you don’t have a button on the door to push. Pushing the button on the door handle does not unlock the Jeep with the fob on your person.
Do I still need a key with keyless entry?
One Does Not Need the Actual Key For Ignition With a Keyless Entry (Photo Source: vox) Smart Key. On the other hand, the Smart Key is a car key containing a microcomputer, which lets the owner gain access to and unlocks the vehicle’s locking mechanism. It completely replaces the metal key found in many modern-day cars.
How do you install an auto keyless entry?
Keyless Entry Installation How to Install a Keyless Entry System Step #1: Remove the Old Deadbolt & Door Knob Step #2: Determine the Backset of Your Door Step #3: Install the New Deadbolt into the Door Step #4: Program Your Access Code Step #5: Install the New Door Knob & Strike Plates Step #6: Test the Door and Lock
What is passive entry in Jeep?
Passive entry is a feature which allows unlocking/locking of your Jeep without having to use the keyfob buttons or physical key and is a Jeep factory order option. The replacement door handles in this kit include buttons to allow this. The feature works using all of the factory encryption, therefore all security measures are retained.
How do keyless entry locks work?
The functioning of a keyless entry system requires transmission of radio waves. It is through the radio waves that coded signals are sent from the button to the receiver in the lock. There is a chip in the transmitter which creates the code.