What causes a car to have a p2111 code?
Common Causes Of A P2111 Code. Possible causes of this code may include: Faulty throttle body. Dirty throttle plate or linkage. Faulty throttle position sensor. Defective accelerator pedal position sensor. Throttle actuator control motor is defective. Corroded or damaged connector.
What to do if your p2111 throttle is stuck?
If you have a P2111 and/or P2112 code with that vehicle, here is a PDF copy of the full TSB 10-21-6 bulletin . The fix involves replacing the throttle body with either part number 7T4Z-9E926-FA or 8S4Z-9E926-B.
Where is the Diagnostic Code on a Toyota Prius?
Prius Hybrid NHW11 1.5 NZ-FXE 2001-2003 OBDII Fault Codes are OBDII type. The DLC (diagnostic connector) is located under the dash on the drivers side. NOTE! The Hybrid Control ECU may contain Fault codes that affect petrol engine ECM operation. Manual Fault Code Extraction:
How to extract a fault code from a Toyota Hybrid?
The Hybrid Control ECU may contain Fault codes that affect petrol engine ECM operation. Manual Fault Code Extraction: Switch OFF ignition and wait 10 seconds before re running any Fault Code Extraction. 1. Ensure ignition is OFF. 2. Bridge terminals #4 and #13 at the Diagnostic Connector. 3. Switch Ignition ON. 4.
Can a marginal battery set a p2111 fault?
Marginal/weak batteries have been known to set an intermittent P2111 fault code. Diagnose current faults first, in the order in which they are stored. Misdiagnosis occurs when this code is diagnosed when it is a stored code, especially while other codes are active.
When to set the p2111 code on the TAC?
Code P2111 can be set when: the idle position set inside the memory of the PCM does not match the stored TPS voltage when it was closed (idle), or it does not match the actual voltage being sent back from the TPS when the TAC/ETC motors are commanded to the closed position. Note: This code is particularly common on late model Fords.