Is the BSM light supposed to be on?
The available Blind Spot Monitor (BSM) switch illuminates when the system is turned on. If a vehicle is detected in a blind spot, the outside rear view mirror on that side of the vehicle illuminates. If your emergency brake is on, simply release it and the light should switch off.
What should I do if my BSM light is not turning off?
Replace the BSM control module. (See BLIND SPOT MONITORING (BSM) CONTROL MODULE REMOVAL/INSTALLATION .) Inspect the following. If a malfunction is detected, repair or replace the malfunctioning part. (See LIGHT SWITCH REMOVAL/INSTALLATION .) If a malfunction is not detected, replace the BCM. (See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION .)
What to do if your tail light bulb is burnt out?
If the bulb is burnt out, you’ll need to replace it. Take it to your local auto store and buy the correct model for your car. If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic.
When to take a tail light bulb to the mechanic?
If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards.
What to do if your abs warning light stays on?
Contact an expert repairer, we recommend an Authorised Mazda Repairer to have your vehicle inspected. If the ABS warning light stays on while you’re driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.
Why is my BSM light not working on my Camry?
I have a 2012 camry xle v6 owned since new. the bsm light on the ip came on and stayed lit. the bsm appeared to not be working as there was a car in the blind spot, but the light in the mirror did not come on. the car was dirty at the time, and I thought perhaps the sensor was just unable to see past whatever dirt.
What does it mean when your BSM light is flashing?
The BSM light flashing indicates a fault in the blind spot monitoring system. You can inspect the sensors and module for connections and wiring fault but the only way to find out the fault code is to bring it to a Mazda dealer or a shop that has a good scan tool…
What happens when you press the BSM button?
I did try allowing the car to complete the power up System Check while in park and then pressed the BSM button, but with no luck. The warning triangle turns on, and the center display indicates, “Check Blind Spot Monitor System”. Any other ideas or maybe it’s a dealer service call item. Thanks for the info.
Where is the BSM button on a Toyota?
The warning triangle turns on, and the center display indicates, “Check Blind Spot Monitor System”. Any other ideas or maybe it’s a dealer service call item. Thanks for the info. I did try allowing the car to complete the power up System Check while in park and then pressed the BSM button, but with no luck.