Is it safe to turn off gas valve?
In an emergency, your gas can be turned off at the main gas service shutoff valve. Do not shut off the gas unless you smell gas, hear gas escaping, see a broken gas line or suspect a gas leak. The safe way is to first turn off the gas. This can be easily done with the gas meter or the shut-off isolation valve.
Can you turn the gas back on after shutting off the valve?
Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.
Where is the shutoff valve on a gas range?
Shutoff valves for standard (freestanding) gas stoves or ranges typically are located behind the appliance. If you smell gas, open windows to provide ventilation to the room. Do not turn on vent fans or even operate light fixtures until the gas has been shut off and the room has been ventilated.
What’s the best way to shut off a gas line?
To close the valve, Use clamping pliers, an adjustable wrench, or an open-end wrench, and turn the valve handle 90 degrees so it is fully perpendicular to the gas line. It is a good idea to keep a wrench handy for this purpose and keep it located next to the shutoff valve.
Can a light switch turn off a gas leak?
Do not attempt to shut off the gas supply at the meter or anywhere else. Even turning on a light switch can ignite a gas explosion inside a house. A strong gas odor indicates a leak, which must be checked out by a utility technician.
To close the valve, Use clamping pliers, an adjustable wrench, or an open-end wrench, and turn the valve handle 90 degrees so it is fully perpendicular to the gas line. It is a good idea to keep a wrench handy for this purpose and keep it located next to the shutoff valve.
Why is the gas shut off valve lined up?
The utility company will use the hole to lock the valve in a closed position when the gas account is closed. When the holes in the valve handle are lined up, it indicates the valve is in the off position.
How do you change the switch on a gas stovetop?
Lift the stovetop up and support it with a block of wood or a wire support. Remove the control panel cover by removing screws along the top and bottom of the panel. Unhook the electrical harness wires connected to the switch, then lift the switch off the valve.
Where do you put the gas shutoff valve on a stove?
Use the gas shutoff valve connected to the appliance’s flexible supply line to turn off the gas to a stove. Building codes now require the gas shutoff valve to be located within 6 feet of the appliance and in the same room, so if you find an improper situation, it is a good idea to have a service person install a proper shutoff valve.