How to replace track rod on Peugeot 206CC?
Position the tool [2] on the connecting rod to be replaced . NOTE : in the case of replacement of the connecting rod on the opposite side to the pinion, remove the gaiter but leave the tool [1] in place on the pinion side . Remove the track rod : USING THE TOOL [2].
How to remove ball joints from Peugeot 206CC?
REMOVE THE 4 BOLTS OF THE TOOL [1A]. Unscrew the threaded pins [1b] by a few turns . Fit the tool [1] on the rack, the plate of the tool on the teeth side and the supports with ball joints at the bottom (sub-frame side) .
How to remove steering rack from Peugeot 206CC?
1 – REMOVAL Place the vehicle on a two-post ramp . Remove the front wheels . Immobilise the steering rack : USING THE TOOL [1]. IMPERATIVE : the tool [1] must be positioned on the teeth of the rack, on the left for left-hand drive, on the right for right-hand drive . Release the tracking adjusting nut .
What’s the tightening torque on a Peugeot 206?
206 = tightening torque : 7 da.Nm 406 – 607 = tightening torque : 9 da.Nm 806 – EXPERT = tightening torque : 8 da.Nm BOXER = tightening torque : 12 da.Nm REMOVE THE TOOL [1]. Grease (TOTAL N3924 / N3945 grease) : the mating surfaces (A) of the rack gaiter(4) the rack NOTE : do not apply grease at (B) . Fit a new gaiter (2) .
Position the tool [2] on the connecting rod to be replaced . NOTE : in the case of replacement of the connecting rod on the opposite side to the pinion, remove the gaiter but leave the tool [1] in place on the pinion side . Remove the track rod : USING THE TOOL [2].
REMOVE THE 4 BOLTS OF THE TOOL [1A]. Unscrew the threaded pins [1b] by a few turns . Fit the tool [1] on the rack, the plate of the tool on the teeth side and the supports with ball joints at the bottom (sub-frame side) .
1 – REMOVAL Place the vehicle on a two-post ramp . Remove the front wheels . Immobilise the steering rack : USING THE TOOL [1]. IMPERATIVE : the tool [1] must be positioned on the teeth of the rack, on the left for left-hand drive, on the right for right-hand drive . Release the tracking adjusting nut .
206 = tightening torque : 7 da.Nm 406 – 607 = tightening torque : 9 da.Nm 806 – EXPERT = tightening torque : 8 da.Nm BOXER = tightening torque : 12 da.Nm REMOVE THE TOOL [1]. Grease (TOTAL N3924 / N3945 grease) : the mating surfaces (A) of the rack gaiter(4) the rack NOTE : do not apply grease at (B) . Fit a new gaiter (2) .