How to replace the air intake actuator on a Mazda 3?
Install in the reverse order of removal. 1. Connect battery positive voltage to air intake actuator terminal B (or C), connect terminal C (or B) to ground, and then verify that the air intake actuator operates as shown in the table. If the operation condition is not normal, replace the air intake actuator.
What is the air recirculation switch on my Mazda 3 giving me?
The air re-circulation switch on… The air re-circulation switch on my 2010 Mazda3 is giving me a 10 seconds (roughly) clicks whenever it is being turned on/off . I suspect there is a motor / actuator associate to the switch is broken? stripped?
What’s the problem with Mazda’s powertrain control modules?
It all centers around the software Mazda’s ECUs use to regulate cylinder deactivation. The automaker recently found that the software behind the Powertrain Control Modules (PCM), specifically the part of it that controls the hydraulic valve clearance adjuster, can go awry during the transition between cylinder deactivation states.
How to remove the glove compartment in a Mazda 3?
1. Pull the stay damper in the direction (1) shown in the figure, and detach the hook A between the glove compartment and the stay damper. 2. Pull up the hook B in the direction of arrow (2) and remove it in the direction of arrow (3) shown in the figure. 3. Lower the glove compartment. 4.
The air re-circulation switch on… The air re-circulation switch on my 2010 Mazda3 is giving me a 10 seconds (roughly) clicks whenever it is being turned on/off . I suspect there is a motor / actuator associate to the switch is broken? stripped?
Install in the reverse order of removal. 1. Connect battery positive voltage to air intake actuator terminal B (or C), connect terminal C (or B) to ground, and then verify that the air intake actuator operates as shown in the table. If the operation condition is not normal, replace the air intake actuator.
What causes a vacuum leak in a Mazda3?
Vacuum leaks, either with the wires or the seals, can harm the air and fuel mixture flow. If the mixture of air and fuel becomes disrupted due to the throttle body pressure issues, incorrect fuel can be sent to the engine, leading to unburnt fuel being wasted.
What are the most common problems with a Mazda3?
Brakes Mazda3 Problems The most common issues with the Mazda3 problems in the brake system are the ABS and DSC lights turning on and the caliper leaking brake fluid. The NHTSA cited various concerns regarding the service brakes, the electronic stability control, the hydraulic service brakes, the parking brake, and the traction control system.