How to remove Mercedes Benz steering wheel airbag?
Use white out,a marker or nail polish to mark the relationship between the wheel and the steering shaft (red arrow).This will help when reinstalling. You can now remove the wheel from the colum.Installing is reverse of removal.Once the airbag is installed,reconnect the battery. Done!
Where are the holes in the back of the steering wheel?
Extend the steering so that it’s on the outermost position. Disconnect the battery. Locate the two holes in the back of the steering wheel. They are right behind the steering wheel, typically behind the steering wheel buttons. One is to the left and one is on the right at 3 and 9 o’clock. Use the T30 Torx to remove those two screws.
What happens when you remove the steering wheel?
If you rotate the angle position sensor when the steering wheel is off and then install the steering wheel. The car will think that you have the steering wheel rotated when you are driving straight. This in effect can cause that you get a ESP error when you start to drive the car. So you are looking to remove the steering wheel.
Use white out,a marker or nail polish to mark the relationship between the wheel and the steering shaft (red arrow).This will help when reinstalling. You can now remove the wheel from the colum.Installing is reverse of removal.Once the airbag is installed,reconnect the battery. Done!
How do you remove an SRS airbag warning light?
Hold the center section of the wheel in place — where your airbag is located — and locate the screws. Unscrew them. Step 3: Once the screws have been unscrewed, pull the airbag towards you and remove the connectors. Use a pick to slide the yellow clips out in order to remove the connector. You can now remove the airbag.
Why does the airbag warning light come on?
You may already know which light we’re referring to — the airbag warning light. When the airbag warning light turns on, it could be signaling a minor fault in your sensors, or it could be a far more serious issue.