How to get a serpentine belt cross reference?
SERPENTINE BELT CROSS REFERENCE Customer Service: 800-95-BANDO | [email protected]| www.BandoUSA.com W O R L D C L A S Q U A L I T Y SI N CE 1 9 0 6 Metric 6 Number of Ribs Size of Rib Number of Ribs Length in 10th of an inch Millimeters x 0.03937 = inches Inches x 25.4 = millimeters Metric Pitch – Size of Ribs Number of Ribs
What does the serpentine belt do in a car?
Under your hood, the power steering system, air conditioning, and climate system, water pump, and alternator are all driven by the serpentine belt. When the engine is running, the belt winds its way around pulleys attached to all of those components and operates mostly silently when everything is working properly.
Where is the tensioner on a Micro V belt?
Belt should be seated into all pulley grooves and belt spans free of contact with engine components. With belt routing solved, the tensioner must be located along with its direction and manner of movement. Serpentine belts are usually tensioned by a spring loaded idler pulley contacting the smooth backside of the belt.
What kind of belt is on a Vortec truck?
4.2L Inline Six Cylinder Engine Bel… 3800 V6 Belt Routing Picture and Ro… Supercharged 3.8L V6 Drive Belt rou… Vortec 5.3 and 4.8L V8 Truck Belt R…
What does the serpentine belt do on a car?
Touch device users, explore by touch or with swipe gestures. The serpentine belt connects the pulleys of the engine’s accessory drive. It is driven by the crankshaft to turn the water pump, power steering pump, A/C compressor, alternator, and more.
How do you measure the size of a serpentine belt?
With the string tightly wrapped around the correct path of the serpentine belt according to the diagram in your owner’s manual, mark the area on the string with a marker where it completely wraps around. Measure the length of string it took to wrap around the path of the serpentine belt.
How can I increase the tension on my serpentine belt?
Increase the tension on the belt. If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt.
What’s the best way to replace a serpentine belt?
Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
What happens if a serpentine belt goes bad?
The serpentine belt in most modern vehicles transfers power from the crank pulley to the various accessories mounted on the engine. A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function.
How is the tension set on a serpentine belt?
Depending on the application, your serpentine belt will either have tension placed on it using a movable bracket or an auto tensioner pulley. This pulley uses an internal spring to apply consistent pressure to the belt at all times. If your vehicle does not have a tensioner pulley, the alternator bracket is likely how tension is set on the belt.