How to fix rear drivers side running light?
On the left rear is a junktion block with 4 connectors. Remove the tail light, disconnect the wiring harness on the junction block and pull it out. Check the wiring, i’m sure you will find a broken wire or corrosion in the connector. Apply dielectric grease in the big connector when you put it back in.
Why are my driver side tail lights not working?
It’s the driver side anzo ubars, led strip, clearance lights and turn signals, tow mirror running lights and the rear tailight and all those are led on my car. could it be the leds not working well in the cold? Well guys it finally got cold, everything still works.
Why are the running lights not working on my Silverado?
The top and bottom two work for stop and turn but do not come on for running lights. If it was a ground the whole lighting assembly should not be working and if it was a bulb socket, then the bulb would not be working for the stop and turn functions. On the left rear is a junktion block with 4 connectors.
Are there rear running lights on a V-twin?
No rear running lights! Can’t figure it out. Brake light works, rear turns work, but no rear running lights. Fuses have continuity and wires look good. The brake bulb was blown and I replaced it, so I’m thinking maybe I had a surge.
Are there running lights on the rear drivers side?
My rear drivers side running lights do not work. I still get brake, turn signal and reverse lights out of that assembly, but get nothing for running lights. All lights and functions on all of the other lights both front and back work fine, it is just the running lights for the rear drivers side that I do not have.
It’s the driver side anzo ubars, led strip, clearance lights and turn signals, tow mirror running lights and the rear tailight and all those are led on my car. could it be the leds not working well in the cold? Well guys it finally got cold, everything still works.
Why is my rear brake light not working?
The rear brake light and turn signal is not working on the driver side. I have replaced the bulbs and the connectors but to no avail. I checked the fuses and they are fine as well. When I take my electronic key and unlock the truck the driver rear lights will not light up but when I lock the doors it does light up in the back.
The top and bottom two work for stop and turn but do not come on for running lights. If it was a ground the whole lighting assembly should not be working and if it was a bulb socket, then the bulb would not be working for the stop and turn functions. On the left rear is a junktion block with 4 connectors.