How much do log splitters weigh?
Dimensions
| Length | 85.8 in. |
|---|---|
| Width | 40.7 in. |
| Height | 45.9 in. |
| Weight | 396.8 lb. |
How much do hydraulic log splitters weigh?
9-3/4 in. 42-1/8 in. 80.50 lb.
What kind of hydraulic fluid does a Huskee 22 ton log splitter take?
Manual wants iso46 hydro fluid. Capacity max is 6.5 gallons on a dry system. Depending on temp outside, ATF and lower viscosity hydro fluids are permitted and actually encouraged. Motor oil used is 5w30 iirc and holds .
How fast can you drive pulling a log splitter?
The manual for my huskee splitter lists a max speed of 45 MPH.
Is a 20 ton log splitter big enough?
How Large Are Your Logs? Logs that are larger in diameter need more pressure to split. That’s why a 4-ton log splitter will work well for 6″ branches, but a 24″ tree trunk will require at least the force of a 20-ton splitter.
What size log can a 7 ton log splitter split?
19 inches
Champion’s 7-ton log splitter features an integrated log cradle and low profile for easy loading. The 79cc engine easily powers through logs up to 19 inches in length and 50 lb.
How often should you change the hydraulic oil in a log splitter?
How often should you change hydraulic fluid in a log splitter? A lot of manufacturers will advise that you should change your fluid after every 50 hours. However, if the fluid used is of high quality this will usually give you around 150 hours of log splitting operation.
What kind of oil does a Huskee log splitter take?
ENGINE OIL RECOMMENDATIONS NOTE: Engine oil is provided with your log splitter. Follow instructions in engine owner’s manual for filling. degrees F will result in hard starting and possible engine bore damage. For temperatures below 40 degrees F use an SAE 10W-30 or SAE 5W-30 oil.