How does an injection pump work?
An Injection Pump is the device that pumps fuel into the cylinders of a diesel engine. It rotates at half crankshaft speed in a conventional four-stroke diesel engine. Its timing is such that the fuel is injected only very slightly before top dead centre of that cylinder’s compression stroke.
When to add oil to INJ pump yes or no?
Yes, my understanding is that if you have the other kind of injection pump, the oil will drain out when you do an oil change. As always, make sure your engine oil is warm so that it will flow out better. Add 5 0z of engine oil through the top of the pump after you have completed the oil change and before you fire up the engine.
Can you add oil to a diesel injector pump?
If anyone out there has the Diesel KIKI injector pump manual, or an up to date passage from this section of the service manual, now would be a good time to speak up! He’s got the other pump sixbales, the newer one without the drain and oil level plugs.
Why do I have a problem with my fuel injection pump?
Fuel injection problems, therefore, are one of the most pressing engine issues to deal with. Whether you’ve experienced fuel injector failure or not, it helps to understand the fuel injector pump, how it relates to engine performance, and also how diesel fuel injection pumps differ from traditional gasoline-powered units.
How much psi does a fuel injector pump use?
Around 15-20 years ago, it was common for fuel injector pumps to process fuel in a system at around 10,000 to 15,000 psi (pounds per square inch). But that’s only about half of what engines are expected to do today.
Yes, my understanding is that if you have the other kind of injection pump, the oil will drain out when you do an oil change. As always, make sure your engine oil is warm so that it will flow out better. Add 5 0z of engine oil through the top of the pump after you have completed the oil change and before you fire up the engine.
If anyone out there has the Diesel KIKI injector pump manual, or an up to date passage from this section of the service manual, now would be a good time to speak up! He’s got the other pump sixbales, the newer one without the drain and oil level plugs.
Where does the oil go in an oil injection system?
The typical injection system is simple in its operation. The oil (usually a little over a quart for most bikes) is poured into the oil tank where it is fed to the oil pump.
How much pressure does a fuel injection pump have?
Pressure-Packed Fuel Injection. Today’s diesel fuel injection pumps are under pressure – even more pressure than what was once considered “normal.” Around 15-20 years ago, it was common for fuel injector pumps to process fuel in a system at around 10,000 to 15,000 psi (pounds per square inch).
What are the injection pump tighten torque?
The injection pump mounting bolts need to be tightened to 32 ft. The fuel transfer pump mounting bolts require 9 ft. -lb. of torque.
What is phasing of fuel injection pump?
Fuel injection pump phasing is a procedure that adjusts the fuel injection timing of the fuel injection pump relative to the crankshaft. Adjusting the injection timing provides reduction of torque fluctuations and can thus be used to control gear impact noise.
What is the important of injection setting in injection pump?
Why You May Want to Adjust Your Injection Timing The primary purpose of a fuel injection system is to provide diesel to an engine’s cylinders — but how and when the fuel is delivered can impact an engine’s performance, sound and emissions. Advancing or retarding an engine’s timing is possible.
What is the function of fuel injection pump?
The fuel injection pump is a mechanical device that introduces the fuel into the cylinders of automotive engines. It works as a heart of a diesel engine and maintains its rhythm to keep it running smooth for years. Moreover, it is also responsible for controlling the fuel flow to gain the desired power.
How big is a Bosch torque injection pump?
Torque injection pump drive gear nut to the following specification, depending on which model injection pump you have. “A” Pump 85 nm [63 f t lb], P3000 and P7100 200 nm [150-160 ft lb], Denso 123 nm [91 ft lb]
What happens if you put too much torque on the pump?
Caution: Improper torque (less than specified) will cause the drive gear to slip under load resulting in incorrect pump to engine timing. This will cause retarded timing and result in miss, rough run, heavy white smoke or no run. Excessive torque can cause the drive gear to split and damage engine components.
How does a fuel injector work in an engine?
It’s about as simple as you can get: fuel injectors supply fuel to the engine’s internal combustion chamber. The fuel is dispersed from the injection pump to the combustion chamber via a fairly simple process. Pressurized fuel enters the fuel injector.