How does a factory radio work on a Harley Davidson?
Use a DSR1 and the DSR1 signal harnesses that we have designed and your factory radio will be plug and play with your aftermarket stereo system. Note: All bikes that have factory amplifiers require some additional adapters. Give us a call and we can set you up with exactly what you need for your particular bike.
How do you remove a stereo from a semi truck?
For stereos without a “trim ring” surrounding the stereo face you should be able to see openings on the sides of the stereo where you may insert a tool to remove the unit. When you receive your new Semi-Truck stereo the removal tools will be included.
How to connect factory radio to aftermarket stereo?
We recommend that you turn this feature off. Simply go through your audio settings and turn it off. That’s it! Use a DSR1 and the DSR1 signal harnesses that we have designed and your factory radio will be plug and play with your aftermarket stereo system.
What happens when you remove the factory speakers on a Harley Davidson?
When you remove the factory speakers and instead feed the radio output to an aftermarket amplifier or sound processor, the radio has no load and the output becomes unbalanced. A special resistive load needs to go between the radio and the next device (amplifier or processor).
Use a DSR1 and the DSR1 signal harnesses that we have designed and your factory radio will be plug and play with your aftermarket stereo system. Note: All bikes that have factory amplifiers require some additional adapters. Give us a call and we can set you up with exactly what you need for your particular bike.
How to install a stereo in a Harley Davidson?
Note: Even if your Harley is not equipped with a factory radio, you can install an aftermarket stereo. Tools needed: Torx T-25 driver, Phillips screwdriver, 3/16″ and 1/4″ hex drivers It’s relatively easy to retain the handlebar audio controls when you install a new stereo in your Harley.
Is the Harley Davidson LiveWire still in production?
Yes, it’s a new bike, but the Livewire has had numerous problems in its short on again off again life. The electric bike has experienced problems with its charging system, which in turn led Harley to stop production of the bike in October of 2019.
How does a stand alone DSP work on a Harley Davidson radio?
Use a stand alone DSP (digital sound processor). This is a digital device (EQ) that can undo the EQ that is programed into your radio and also allow you to re- EQ your sound to your taste. This is really the ultimate solution. There are several manufactures out there that make these devices.
Use a stand alone DSP (digital sound processor). This is a digital device (EQ) that can undo the EQ that is programed into your radio and also allow you to re- EQ your sound to your taste. This is really the ultimate solution. There are several manufactures out there that make these devices.
Is there a friendly flash on a Harley Davidson?
The friendly flash is not from Harley at all. There are radio flashes that the Harley dealer has access to that are more friendly but none of them are correct. The only correct flash available comes from a computerized flashing system made by Techno Research and was developed by Rockford Fosgate.