How do you reset the maintenance required light on a Scion IQ?
With engine running, switch to trip meter “A” and turn engine off. While holding the “MODE” button, turn the ignition to the “RUN” position. Continue to hold button until “000000” is displayed.
When does the maintenance required light go off?
The maintenance required light will remain on and be solid after the mileage interval reaches 5,000 miles since the light was reset. This is the final reminder to bring your car in for service.
How to reset maintenance required light on Toyota?
Follow this procedure to reset the maintenance required light on most early-model and late-model Toyota vehicles ( with video ): 1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode (early model) or to Trip A (late model). 3. Turn the ignition switch to the OFF position. 4.
How to reset the maintenance required light on a Lexus?
Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.
What’s the difference between a check engine light and maintenance required light?
Unlike a check engine light, a maintenance required light is based strictly on a car’s mileage and when the light was previously reset. A qualified service technician can diagnose the car’s maintenance needs and provide the necessary services, such as changing the engine oil and oil filter or providing a general vehicle inspection.
How do I Reset my maintenance required light?
Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks. Let go of the button one more time and hold for five seconds.
What causes the maintenance required light to go on?
As we discussed earlier, the maintenance required light is triggered by mileage, and is concerned with regular car maintenance schedules. The check engine light is triggered by something that’s faulty in the OBD II system. The check engine light can go on for many reasons, including: Faulty or missing gas cap
Is the maintenance required light the same as the Check Engine light?
The “maintenance required” light is not to be confused with the “check engine” light. The picture at the top of this article shows your standard “maintenance required” light; the pictures below show standard “check engine” lights. The “check engine” light is generally a much more serious warning than your maintenance light.
How do you reset the oil life indicator?
Don’t put your foot on the brake, turn the ignition switch to ON, or for push start, push the button once. Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds.