How do you reset the maintenance light on a 2009 Volvo S40?
How to Reset the Time for Maintenance Light on a Volvo S40
- Press in the trip odometer reset knob. Hold the knob down.
- Turn the ignition switch to the “II” position. Do not start the engine.
- Hold the odometer knob down for about 30 seconds until the maintenance light blinks. Release the trip odometer knob.
How do you reset the maintenance light on a Volvo c70?
Press and hold the trip reset button. Turn the key to position two hold the trip reset button still pressed. After 10 seconds release the button and take the key out from the ignition. Turn the ignition off and then start the engine to verify the indicator has been reset.
How do you turn off the maintenance light on a Volvo XC90?
To reset the Time For Regular Maintenance Warning, press and HOLD the Trip Odometer button. While holding the button in, switch the ignition to the ON position without starting the engine. When the Triangle Warning starts flashing, you will hear a BEEP, then let go of the trip odometer button.
How do you turn off the maintenance light on a Volvo c30?
Step 1: Reset Maintenance Message
- Press and hold trip reset button,
- turn on the ignition,
- wait for the yellow warning light to start blinking,
- release the button and wait for confirmations sound,
- turn off the ignition,
- turn the ignition back on to check if the service message is gone.
How to reset the service light on a Volvo?
1 Put your key in the ignition and turn it to position one. 2 Next, turn your trip computer to trip one. 3 Press and hold the trip computer while turning your key to position two. 4 The center arrow will flash red three times. 5 On the third flash, you will let go and an alert will note that you just reset your service light.
How to reset book time for maintenance Volvo S60?
How to reset book time for maintenance warning light on a Volvo S60 second generation. Made between 2010, 2011, 2012, 2013, 2014, 2015. To turn off this service required message you must follow next procedure. With ignition to off position.
Is there a way to reset the service light?
If you’ve done the maintenance work and now want to reset the light, follow these instructions: Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.
How do you turn off the oil service light?
Turn the car key to “off” position “0”. And that’s it, your oil service light indicator light should be off. MOMENTO DE REVISIÓN RUTIN. – Spanish The instructions in this tutorial will work in the following model years, Diesel and Petrol engines: Comments are closed.