How do you remove an axle from a car?
Use a 12mm or 14mm socket or wrench to remove these bolts. If the car does not have this bearing use a large pry bar and wedge it between the transmission case and the axle and pry outward. This will pop the axle out from the transmission and enable you to remove the axle.
How do you remove axle nut from CV?
Remove the Axle Nut Cotter Pin On most car’s there will be a cotter pin that secures the outer axle nut from coming off of the CV joint. Use a pair of side cutters (dikes) to remove the cotter pin from the axle snout. There might also be a star wheel which can be removed after the cotter pin. 2. Remove the Axle Nut
Can a star wheel be removed from a CV axle?
On most car’s there will be a cotter pin that secures the outer axle nut from coming off of the CV joint. Use a pair of side cutters (dikes) to remove the cotter pin from the axle snout. There might also be a star wheel which can be removed after the cotter pin. 2. Remove the Axle Nut
How do you unbolt a leaf spring from an axle?
Pull the driveshaft out of the end of the axle then set it down so that it won’t be in the way when taking out the assembly. Unbolt the leaf spring U-bolts from the axle using the 1/2-inch ratchet and socket, then unbolt the rear leaf spring hangers from the leaf springs using the ratchet and an open-end wrench.
How to remove a Ford axle step by step?
SHARE THIS ARTICLE: Please feel free to share this post on Facebook / Twitter / Google+ or any automotive Forums or blogs you read. You can use the social sharing buttons to the left, or copy and paste the website link: https://www.diyford.com/ford-axle-removal-complete-step-step-instructions/
Can a rear axle be removed from a tri five?
Tri-Five vehicles use a leaf spring style (or Hotchkis) of rear suspension. If your vehicle has a coil-style arrangement, there are some differences for removing the axle from the vehicle. The main one is that there are control arms bolted between the axle and frame or body that need to be removed.
Why are the studs on my Ford axle broken off?
The axle has rusted over time, and therefore it has plenty of rusted, stubborn fasteners. One of the wheel studs has already been broken off because it was severely rusted and difficult to remove, which is common on used units. Some folks are afraid of the simple process of pressing a new stud in place and leave a unit just like this.
Why do you remove shocks from an axle?
Typically, the shocks are the travel limiters of the axle at full rebound. So, once the vehicle is securely supported by jack stands, remove the shocks. This allows the axle assembly to drop even lower in the chassis.