How do you remove a convertible top from a Mitsubishi Eclipse?
Remove the screws on the Spyder’s set pate using a slotted screwdriver. Pull the molding away from the spyder, pulling it outwards. Remove the fabric rivets that connect the convertible top to the rest of the car using a rivet gun. Remove the Spyder’s convertible top by gently pulling it from the car.
What are the problems with the Eclipse Spyder roof system?
One very common problem with the 2g Eclipse Spyder roof system, and one that will effect all cars at some point, is the elastic straps connecting the floating rib to the 2nd rib. The elastic gets all stretched out. The elastic straps are connected by plastic clips that snap over the top of the ribs.
How to remove top motor on Spyder convertible?
Disconnect power to top motors and remove two 8mm bolts and two torx screws holding each motor in place. There is a plastic spacer over one bolt on each side. Don’t loose them. You may have to bend a metal mounting ear inside the speaker cover area to access one side of the motor.
What causes a bent top on a Spyder?
The improper folding of the roof during retraction causes a couple of other problems. The worst of these is bent links that connect the floating rib to the side frame. You can access these by pealing back the headliner from the front. It’s held by a couple of screws at the corners and a strip of heavy Velcro.
How does the Mitsubishi Eclipse Convertible top work?
The Mitsubishi 4th gen Eclipse convertible is a cloth convertible top with a back window bonded to the fabric. The top raises and lowers by way of a hydraulic rotary actuator with 2 hydraulic cylinders for raising and lowering the 5th top bow and 1 hydraulic cylinder for raising and lowering the tonneau cover.
One very common problem with the 2g Eclipse Spyder roof system, and one that will effect all cars at some point, is the elastic straps connecting the floating rib to the 2nd rib. The elastic gets all stretched out. The elastic straps are connected by plastic clips that snap over the top of the ribs.
How is the hydraulic system on a Mitsubishi Eclipse?
The hydraulic system is operated by a single pump run by an electric motor, and with valving which is triggered by electronics which receives signals from certain switches I’ll describe later. When the top is closed, it is secured at the 1st top bow to the windshield header by two manually operated mechanical latches.
How can I Fix my Spyder convertible top?
Mark the webbing in fully up and latched position, retract the roof partway, line up the webbing over the rib, and fire in some staples. Be sure they go in all the way. Roof does will not raise or lower electrically. Before tearing anything apart, verify that the switch is not set to manual.
How do you remove a top from a Spyder?
Remove the Spyder’s convertible top by gently pulling it from the car. Clear any snagged parts of the convertible. Place the new convertible top over the rain rail. Reattach the rivets using a rivet gun. Reassemble the rain guard using a screwdriver. Reattach the remaining parts of the convertible top, in the opposite order that you removed them.
How do you replace a window on a Spyder?
Tape newspaper onto your Spyder’s window’s and windshield using masking tape. This will protect your windows from damage during the replacement. Remove the clips from the rear deck using a Phillips-head screwdriver. Remove the Phillips screw using the screwdriver. Set the screw and clips aside.
Is the Mitsubishi Eclipse a coupe or a Spyder?
Although the Spyder’s resemblance to the coupe is apparent, particularly in the beltline a… The Eclipse, available in coupe and convertible (Spyder) body styles, is Mitsubishi’s front-wheel-drive sports car.
How big is the wheelbase of a Mitsubishi Eclipse?
Built on a 101.4-inch wheelbase, the Eclipse is 179.7 inches long overall. Although the Spyder’s resemblance to the coupe is apparent, particularly in the beltline and the rear end, its retractable top gives the Spyder an identity separate from the teardrop-shaped coupe.
What kind of transmission does the Mitsubishi Eclipse have?
The new SE trim level comes with the four- or six-cylinder. The SE V6 is the first Eclipse ever to include an electronic stability system. The automatic transmission incorporates Sportronic, which permits manually selectable gear changes.
What are the new paint colors for the Mitsubishi Eclipse?
New paint colors for 2008 are called Optimist Green, Rave Red and Northstar White. The four-seat cabin has high-back front sport seats with integrated head restraints. The eight-way manually adjustable driver’s seat incorporates adjustable lumbar support.
What kind of engine does a Mitsubishi Eclipse Spyder have?
Eclipse Spyder GS: Convertible model equipped with a 141 hp (105 kW) 2.4 L 16-valve SOHC Mitsubishi 4G64 engine. Eclipse GS-T: Upgraded model equipped with a 210 hp (157 kW) and 214 lb⋅ft (290 N⋅m) of torque turbocharged and intercooled 2.0 L 16-valve DOHC Mitsubishi 4G63 engine.
What are the trim levels of the Mitsubishi Eclipse?
For the 2010 model year in the U.S., its primary market, the Eclipse was available in five trim levels: GS, GS Sport Spyder, SE, GT, and GT Spyder. In Mexico, the GT Spyder is known as the Eclipse Convertible. In Canada, the GT trim is known as the GT-P.
When did the Mitsubishi Eclipse get a rear spoiler?
The GS-T coupe and GSX received a large rear spoiler. The interior color choices also changed from blue, and grey in 1995–1996 model years to black/grey, tan/black, and grey in the 1997–1999 model years.
Can a Mitsubishi Eclipse spyder convertible top be replaced?
If you want to replace your Mitsubishi Eclipse Spyder convertible top headliner we offer precisely made Eclipse convertible top replacement headliners. Click on a link at the right to your Eclipse convertible top year to find the Eclipse headliner and other Mitsubishi Eclipse Spyder convertible top accessories.
What kind of top does a Eclipse Spyder have?
The Mitsubishi Eclipse Spyder convertible top is available in original and alternative convertible top fabrics and colors for the three different Mitsubishi convertible top frames.
Where can I buy Mitsubishi Eclipse auto parts?
When you purchase Mitsubishi Eclipse auto parts from our dealership, you can rest assured that you are getting the highest quality parts from experts that know your vehicle. About Mitsubishi Parts Warehouse Catalog: Mitsubishi Parts Warehouse has the largest inventory catalog of Mitsubishi Auto Parts and accessories in the Country.
For the 2010 model year in the U.S., its primary market, the Eclipse was available in five trim levels: GS, GS Sport Spyder, SE, GT, and GT Spyder. In Mexico, the GT Spyder is known as the Eclipse Convertible. In Canada, the GT trim is known as the GT-P.
Why is my Mitsubishi Eclipse Convertible top leaking?
It is also possible, if the fluid level is good and the manual release valve is tight, that a seal in the hydraulic system might be leaking internally. For a 2008, if it’s still in warranty, this would definitely be something that should be fixed under warranty by the dealer.
What to do if your convertible top is not working?
Check for broken wires or in the case of the top up/down switch on the side of the hydraulic motor, maybe the bracket is bent and the switch isn’t contacting properly. You might be able to fix broken wires or bent brackets on your own. Otherwise it might be a bad switch which would require a replacement part.
The hydraulic system is operated by a single pump run by an electric motor, and with valving which is triggered by electronics which receives signals from certain switches I’ll describe later. When the top is closed, it is secured at the 1st top bow to the windshield header by two manually operated mechanical latches.
Remove the screws on the Spyder’s set pate using a slotted screwdriver. Pull the molding away from the spyder, pulling it outwards. Remove the fabric rivets that connect the convertible top to the rest of the car using a rivet gun. Remove the Spyder’s convertible top by gently pulling it from the car.
When did the Mitsubishi Eclipse spyder convertible come out?
Mitsubishi Eclipse Spyder Convertible Tops and Convertible Top Parts. The Mitsubishi Eclipse Spyder convertible was introduced in 1995. We offer a variety of Mitsubishi Eclipse convertible tops for Mitsubishi Eclipse Spyder convertible cars made from 1995 to the present.
How to restore a detached view in Eclipse?
When I drag a view outside of the Workbench window, the view becomes a detached view. The Eclipse help says (Workbench User Guide -> Tasks -> Working with views and editors -> Detaching views and editors): “To restore the view to be shown inside of the Workbench window, drag the view tab into the Workbench window.”
How to attach a tab to an Eclipse IDE?
As per njol’s answer above, once you have your tab detached (showing as floating outside of your Eclipse IDE), simply click on the tab (not on the title of detached tab window) and drag. Then you will see mouse cursor change showing you where you can drop it to attach the tab to IDE.