How do you disconnect an indicator stalk on a car?
Before carrying out any work on the stalk disconnect the battery leads as a safety precaution against short circuits . On the majority of cars you have only to remove the steering column shroud to gain access to the indicator stalk switch mechanism.
How do you fix a left hand turn indicator stalk?
Disconnect the multi-plug and, again referring to your workshop manual, identify the wires running to the stalk. Connect the test meter to the main switch feed terminal and the output wire for the left-hand indicator circuit. Turn the indicator stalk to the left-hand turn position.
What to do if your indicator stalk is beyond repair?
If the stalk appears beyond repair check with your local main dealer to find out whether any component parts are available. The vast majority of switch/stalk assemblies however are only available as a complete unit and they are often quite expensive to buy new. It is worth trying at a local breaker’s yard to find a replacement switch.
Do you need to remove steering column shroud to fix indicator stalk?
Before carrying out any work on the stalk disconnect the battery leads as a safety precaution against short circuits . On the majority of cars you have only to remove the steering column shroud to gain access to the indicator stalk switch mechanism. But in some cases you will also have to remove the steering wheel (for details see Projects 2).
What’s the best way to remove an indicator stalk?
The first step involves the removal of the steering wheel. Before you do this, make sure the car is parked straight with the steering position being flat so that putting wheel back at its original position would be easy. Alternatively, use a dab of paint or Tippex to mark the position of the wheel/column.
Before carrying out any work on the stalk disconnect the battery leads as a safety precaution against short circuits . On the majority of cars you have only to remove the steering column shroud to gain access to the indicator stalk switch mechanism. But in some cases you will also have to remove the steering wheel (for details see Projects 2).
What causes the indicator stalk to turn to the left?
Turn the indicator stalk to the left-hand turn position. If the circuit tester illuminates, the wiring to and inside the switch are okay. If the circuit tester fails to light, it indicates a fault either in the switch itself or in the wiring between the switch and the multi-plug.
What can I use to clean the contacts on an indicator stalk?
On older stalk assemblies it is usually possible to clean up the contacts of the assembly with fine grade wet-or-dry paper or a small nail file. Operate the switch and take a closer look at the contacts to see how they work.