How do you change a headlight on a 2002 Toyota Sienna?
How to Replace Headlight Bulb 1997–2002 Toyota Sienna
- Open the hood and locate the bulb behind the headlight assembly.
- Remove the electrical plug which pulls out and off.
- Remove the rubber boot.
- Push the spring wire lock out and away with your finger.
- Remove the bulb.
How do you change a headlight on a 2004 Chrysler Crossfire?
How to Change a Headlight Bulb on a Chrysler Crossfire
- Open the hood of your Crossfire to gain access to the headlight assemblies. Press down on the tab on top of the light assembly cover.
- Pull the electrical connection free of the bulb socket.
- Insert the new bulb in the same position.
What kind of headlight does a 2004 Sienna have?
The 2004 Sienna was redesigned to make it comparable to the competitor’s minivans, as it was smaller than most minivans of that time. The headlight on the 2004 Toyota Sienna contains a dual-bulb system, which uses one bulb for low-beam lighting and one bulb for high-beam lighting. Both bulbs are mounted into one assembly.
How to adjust the headlight level on a Toyota Sienna?
Start the engine. NOTICE: Engine rpm must be 1,500 or more. Set the headlight leveling switch to 0 (zero). Turn on the headlight and make sure that the cutoff line falls within the specified area, as shown in the illustration.
What should the H line be on a Toyota Sienna?
H Line (Headlight height): Draw a horizontal line across the screen so that it passes through the center marks. The H line should be at the same height as the headlight bulb center marks of the low-beam headlights.
How do you remove a light bulb from a headlight?
Remove the metal locking clips from the back of the bulbs, by hand — these are tiny metal clips, about the thickness of a small paper clip; simply push the clips inward toward the rear of the bulb, then unlock the clips from the bulbs. Turn the bulb sockets counterclockwise to remove the high- and low-beam bulbs from the headlight assembly.