How do I turn on my Jeep sway bar?
This system allows greater front suspension travel in off-road situations. This system is controlled by the SWAY BAR switch located on the instrument panel (to the left of the steering column). Press the SWAY BAR switch to activate the system. Press the switch again to deactivate the system.
When to use a quick disconnect on a jeep sway bar?
You have to stop either when you get to the trail and disconnect them or when you get to an obstacle that you need the extra articulation for. This is where a set of quick disconnects comes in handy since it only takes a minute to pull a pin, disconnect the links, and pin it to the frame.
How does a Rubicon sway bar disconnect work?
If you plan on taking your Jeep off-road an important step for maximum clearance and articulation involves disconnecting your sway bar. Rubicon sway bar disconnects have a built-in electronic disconnection module that electronically disconnects the sway bar by the push of a button.
What kind of wrench do I need to disconnect sway bar?
You can also use a ratchet, 3/4 inch socket, and an 18mm wrench. Before loosening anything, you’ll want to have your Jeep on the most level surface you can find. This will make removing the necessary bolts that much easier. Next, go under your Jeep and remove the bottom sway bar disconnect bolt.
What does articulation mean on a jeep sway bar?
When talking about off-roading, articulation is how much flex you have. This means if one of your front wheels drives over something, you see how high up you can get that wheel without lifting another wheel off the ground. The easiest way to boost your articulation is to disconnect your front sway bar links.
Can You disconnect the sway bar on a Jeep Wrangler?
The easiest way to boost your articulation is to disconnect your front sway bar links. This can typically be done in just a few minutes with just a few tools. Doing this will greatly boost your Wrangler’s flex and it will make the ride on the trails smoother.
If you plan on taking your Jeep off-road an important step for maximum clearance and articulation involves disconnecting your sway bar. Rubicon sway bar disconnects have a built-in electronic disconnection module that electronically disconnects the sway bar by the push of a button.
What do I need to disconnect sway bar?
If you’re not ready to shell out for a quick disconnect set, knowing how to manually disconnect your sway bar will be important. First things first, you’re going to need a couple of wrenches and some bungee cords. You can also use a ratchet, 3/4 inch socket, and an 18mm wrench.
When talking about off-roading, articulation is how much flex you have. This means if one of your front wheels drives over something, you see how high up you can get that wheel without lifting another wheel off the ground. The easiest way to boost your articulation is to disconnect your front sway bar links.