How do I turn off the maintenance required light on my Toyota Camry?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
How do you reset the maintenance required light on a 2004?
Once the oil change is done resetting the light is fairly easy. First You will need to press and hold the SELECT/RESET button on the dash while turning the vehicle to the on position with the engine off. Hold this button for at least 10 seconds until the light turns off.
What does the maintenance required light mean on 2004 Toyota Camry?
The Toyota maintenance required light, displayed on the Toyota Camry dashboard as MAINT REQD, was created to help remind drivers of when their next service appointment for an oil change is due. This dashboard warning light is not tied to any vehicle sensors and does not indicate any vehicle malfunctions.
How do I turn the maintenance required light off?
Here’s what you have to do:
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do I turn off the maintenance required light?
How to Reset the Maintenance Required Light?
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
Why did my maintenance required light come on?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.
How do you turn off the maintenance required light on a 2004 Prius?
How to turn off the maintenance required light on prius
- Hold in the brake and press the start until the car turns on.
- Continue to hold in the ODO while turning car off and on with START while foot on brake.
- The maintenance required light will be out.
How do you turn off the maintenance required light on a 2004 Honda Accord?
To reset your 2004 honda accord’s maintenance light, turn the key to the “on” position in the ignition and then turn it off. Depress the odometer trip -b? Button, and hold it down while you turn the key to the “on” position again. The light should go off.
How long can I drive with the maintenance required light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
How do you turn off the maintenance light on a Toyota Camry?
Make sure your odometer is set to display total miles. Turn your vehicle off. Press and hold the same button you use to change your odometer reading. While holding the button, turn your key slightly so your vehicle is on and the dashboard lights display but you do not start your engine.
How to reset the maintenance required light ~ 2006 Toyota?
On most Toyotas you simply: Turn the key to the on position. Determine that the odometer reading is displayed. Turn the key back off. Push and hold the reset button for the trip meters. While continuing to depress the reset button, turn the key back to the “on” position, but not so far as the “start” position.
How do you reset a Toyota Camry ignition?
Press the ODO/TRIP Button to Display TRIP A in the instrument Cluster. Turn the KEY OFF. Press and hold the ODO/TRIP BUTTON knob and turn ignition to the “ RUN/IGNITIO ON ” position. Continue to hold the knob for at least 5 seconds until MAINT REQD flashes and the light is turned off. Turn ignition off.
How do you reset the oil mileage on a Toyota Camry?
While holding the trip meter reset knob, press the “POWER” button once to turn power “ON”, “OIL MILEAGE RESET MODE” will be displayed. Continue to hold knob for at least 5 seconds until “COMPLETE is displayed and “OIL MILEAGE RESET MODE” turns off.