How do I reset my 2012 Ram 2500?
1st Way:
- With the key out of the ignition.
- Disconnect the Negative battery Cable.
- Put the key in the ignition and turn it as if you where trying to the START it.
- Release the key and leave it in the “ON” position and let it sit for 10- 15 min.
- Remove key from the ignition.
How do you reset the computer on a 2001 Dodge Ram 2500 Diesel?
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure:
- Turn the ignition switch to the ON position (Do not start engine).
- Press and release the brake pedal two times.
- Fully depress the accelerator pedal slowly two times within 10 seconds.
Can a Dodge Ram 1500 be put in reverse?
2006 Dodge Ram 1500 SLT quad cab 5.7 Hemi, when i put it into 4WD the light on the dash illuminates and it seems to be in 4WD, however once put in gear like reverse is acts like the brakes are on, and when… Hello,
What causes a car to not go into reverse?
When the clutches begin to fail, the lower gears will not engage. Repair requires replacing the torque convertor and flushing the transmission fluid. A worn reverse gear can also occur when a transmission is mishandled.
Why is my reverse not working on my 4L60E?
Valve Body Issues- A bad valve body can make the reverse gear not work in the 4L60E. If the valve body ends up warped, or if the gasket fails, it’s entirely possible that the gear won’t engage. Booster Valve- A bad booster valve can leave you without reverse in a hurry. Sun Shell- A broken sun shell will cause the 4L60E to lose reverse.
Is there a reverse on a c2500 6.5 TD?
On a mildly chilly morning, my 95 c2500 6.5 TD (4L80E) reversed 2 feet and all of a sudden, felt like a fuse popped. No reverse now -not even a hint of reverse. All forward gears work perfectly. The fluid was brown and low. I drained the pan, replaced the filter, filled it back up.