How do I know what size u-joint I need?
You will need to measure from the edge of one snap ring groove straight across to the edge of the other snap ring groove. For U-joints with outside snap rings, you will need to measure from the edge of one u-joint cap straight across to the edge of the other u-joint cap.
Who makes precision universal joints?
Precision, a brand that is owned and controlled by Federal-Mogul, is a world-renowned supplier of U-joints and differential bearings.
What size is a 1410 u-joint?
Driveshaft and Driveline Parts > Universal Joints > U-Joints BY SIZE > 1410 Series U-Joint 4.188 X 4.188 – 1.188 outside snap ring > 1.188 X 1.188 Bearing Cap Diameter.
What are the dimensions of a 1310 u-joint?
Understanding U-Joints
| Series | Cross Width | Cap Diameter |
|---|---|---|
| 1310 | 3.219 (3 7/32”) | 1.062 (1 1/16”) |
| 1310BC* | 3.219 (3 7/32”) | 2 @1.062 (1 1/16”) 2 @ 1.125 (1 1/8”) |
| 1330 | 3.625 (3 5/8”) | 1.062 (1 1/16”) |
| 1330BC* | 3.625 (3 5/8”) | 2 @ 1.062 (1 1/16”) 2 @ 1.125 (1 1/8”) |
What is a 1480 U joint?
Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway. …
Is Moog and Precision the same?
They are the same. If you buy them, it’s 50/50 which box you get.
How much does it cost to replace U joints?
The u-joint replacement cost is estimated between $225 and $300. Labor makes up about $100 to $125, while the parts should be between $125 and $200. However, these prices vary based on what make and model vehicle you drive.
What is the difference between a 1350 and 1410 u-joint?
1350 joints are found in 1-ton trucks and use the wider body of the 1330 joint but with larger trunnions and caps. 1410 joints use a wider body but the same-size caps as a 1350 joint, making them perfect for high-horsepower, high-angle applications. The two joints split the angle, allowing for greater angularity.
What is a 1350 U joint?
Non-cross-drilled Heavy Duty 1350 U Joint The Thrust washers in each bearing cap is to eliminate metal on metal contact preventing wear and lower overall operating temperature. It is non-greaseable design that is factory lubed with synthetic grease for excellent friction reduction.
How strong is a 1310 U joint?
1,600 lb-ft
The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque. While the 1310 series, the stock size for most Jeeps, is rated for 1,600 lb-ft of torque.”
How to find your U-joint by Dimension?
Search for your u-joint by dimension. Use the depictions of each style listed below to first determine the style of u-joint you desire. After you find the correct style, use the depiction of the selected style once again to find the measurements of your u-joint. Then use the tables found under each individual style to find the correct part number.
How big are the universal joints on a driveshaft?
Driveshaft and Driveline Parts > Universal Joints > U-Joints BY SIZE Series LockUp Width Bearing Cap Diameter LockUp Type 1000 1.5 x 1.5 .938 INSIDE C CLIP 1100/1110 1.718 x 1.718 1.00 INSIDE C CLIP 1100/1110 2.411 x 2.411 .938 Outside Snap Ring 1210 2.438 x 2.438 1.062 Outside Snap Ring
What are the different types of you joints?
Three of the five types of U-joints have the same bearing cup style on all four ends: 4 plain, 4 plate, and 4 grooved. The remaining two types come with a mixture of two bearing cup styles: 2 plain/2 plate and 2 plain/2 grooved.
Are there any universal joints made by Moog?
MOOG® Universal Joints meet original equipment standards. Each is built to stringent tolerances using the highest quality manufacturing processes