Do you need a torque wrench to mount a scope?
If you want to mount your rifle scope and you do not have a torque wrench, you are working at risk. This is not to say that you cannot mount your scope without a wrench. Of course, without a wrench, you can but you just got lucky. This torque wrench comes with a 10-50 inch lbs.
What should rifle scope rings be torqued to?
Ring cap screws should be set to 16 inch pounds (1.33 ft/lbs or 1.8 nm) Base screws should be set to 30 inch pounds (2.5 ft/lbs or 3.4 nm)
Should I use Loctite when mounting a rifle scope?
The quick answer is no we don’t, not unless something indicates to us that it is needed. Most of the companies that make rings and mounts recommend not using Loctite for a couple of reasons. Instead of using Loctite we prefer to use a torque wrench that measures in pounds per inch.
How tight should a scope base be?
A good rule of thumb is to have the rings as far apart as possible for your particular scope. Once the rings are in the correct location, remove scope, push forward and tighten each ring (the 1/2″ nut) finger tight, using your 65 INCH-POUND torque wrench tighten each nut.
How tight should Weaver bases be?
The recommended torque values for tightening screws of individual assemblies for mounting optics given in in/lbs and Nm are: when mounting a Weaver/Picatinny rail on the action, 15-55 in/lbs or 1.69-6.21 Nm (Badger 15 in/lbs or 1.69 Nm), Warne and Nightforce 25 in/lbs or 2.82 Nm, Vortex 55 in/lbs or 6.21 Nm);
Which Loctite for scope bases?
Purple Threadlocker (222) is great for use on scope base & ring screws, set screws, calibration screws, meters and gauges. This non-wicking formula is recommended for fasteners from #2 through 1/4″ and cures in 10 minutes with full strength in 24 hours.
Do you need a torque wrench to mount a rifle scope?
In my humble opinion, mounting a rifle scope is a procedure that is best left to a licensed gunsmith or armor. However, if you are determined to take on the task yourself you want use the best torque wrench you can afford that is designed for scope mounting.
Which is the best torque wrench for optics?
This Vortex Optics torque wrench is well made, easy to adjust and operate. While it allows for torque increment (10 in/lbs to 50 in/lbs), the performance of Vortex Optics torque wrenches is second to none. It will enable every user to deliver accurate tension on scope mount screws.
When do you need a torque wrench mounting kit?
This is a must have tool when you want to torque your Vortex products to your firearms. When you spend hard earned money on your scopes, red dot systems, mounting systems, etc. you want to torque to the correct specifications or there is a potential of damage to your investments later on down the line.
Can a digital torque wrench be used on a digital scope?
With this digital torque wrench that can be handheld, you can now have a more precise reading that allows you to apply corrected settings to your scope rings, bows, and other screws.You don’t have to worry about when the torque setting has been achieved since the audio and visual indicators let you know exactly when that happens.