Can you mix DEXRON 3 and DEXRON 6?
Dex 6 is fine to mix with Dex 3. Just do filter and replaced drained fluid. Dont forget to clean off magnet and put back.
What’s the difference in DEXRON 3 and DEXRON 6?
Dexron VI is a lot more stable at higher temperatures and lasts longer. It can also be used to top off dexron 3, however, you can’t use dexron 3 if you already have dexron 6 originally in your trans, or if it has been flushed with dexron 6.
What is the difference between DEXRON 3 and ATF 4?
The difference is in the chemistry of the fluids,additives etc. Use whatever the dipstick says. If it says ATF+3 then use ATF+4 as Chrysler sent out a TSB to use it in place of the +3 last year. Besides if you have warranty and you use the wrong fluid, the dealership will not warranty it if they find out.
Is DEXRON 3 the same as mercon 5?
Dexron III and Mercon V are similar types of automatic transmission fluid, with the main difference being that Dexron is the formula developed by General Motors, while Mercon was created by Ford. However, Mercon LV and Mercon V are not compatible, so any Ford vehicle manufactured before 2008 requires Mercon V.
Is it okay to use Dexron 3 instead of Dexron 6?
Your vehicle calls for Dexron 3 Dexron 6 is backwards compatible, so you’re okay there, but it’s significantly more expensive Leave the Dexron 6 in there. It is not causing any problems. However, I’m not sure why you put in the slick 50. I don’t think the slick 50 is doing any harm. In fact, I don’t think it’s doing anything at all.
Can you use Dexron VI in a GM transmission?
GM’s newest vehicles require the use of Dexron VI in the transmissions, however. Dexron variations prior to Dexron VI are not forward compatible. GM does not support the use of an older version of the Dexron fluid in any vehicle that calls for Dexron VI.
Can you use mercron Dexron in a Saturn?
Moreover, you cannot use an ATF, Mercron or older variations of Dexron in vehicles calling for Dexron III. Dexron III (H) is fully compatible with Dexron III, and GM engineered Dexron III/Saturn specifically for the Saturn lineup of vehicles. GM terminated all licensing for the production of Dexron III in 2006.
Who is the owner of Dexron VI fluid?
Dexron-VI is all GM. It was originally assigned to Roy Fewkes who heads GM Fluid Approval Committee. It now belongs to GM Global Technology Operations LLC, which is a subsidiary of GM. It is designed to be completely backwards compatible.
Your vehicle calls for Dexron 3 Dexron 6 is backwards compatible, so you’re okay there, but it’s significantly more expensive Leave the Dexron 6 in there. It is not causing any problems. However, I’m not sure why you put in the slick 50. I don’t think the slick 50 is doing any harm. In fact, I don’t think it’s doing anything at all.
GM’s newest vehicles require the use of Dexron VI in the transmissions, however. Dexron variations prior to Dexron VI are not forward compatible. GM does not support the use of an older version of the Dexron fluid in any vehicle that calls for Dexron VI.
When did GM start using Dextron III fluid?
In 1993, GM released new Dexron-III fluid. It is generally backward-compatible with transmissions using earlier Dexron fluids or Type-A/Suffix-A fluid. The fluid specification for Dexron-VI was introduced in 2005, and was first used as the GM factory-fill automatic transmission fluid for model year 2006.
Why does Dexron VI have lower viscosity than Dextron III?
The lower viscosity is intended to gain improvements in fuel economy by lessening parasitic drag in the transmission. Since Dexron VI is not allowed to thin out (lower its viscosity) as much as Dexron III during use, it requires the use of higher-quality, more shear-stable (less prone to thin ess in use) base oils.
Is DEXRON 3 the same as DEXRON 6?
Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. GM manufactured the liquid for compatibility with transmissions requiring earlier versions of the fluid. Dexron VI works in any vehicle that requires ATF-A (the original automatic transmission fluid) or a Dexron variation.
What is compatible with DEXRON VI?
GM considers Dexron VI to be “backward compatible,” meaning GM recommends it for use in any vehicle that originally used any earlier version of Dexron and that it can be mixed with them. However, GM specifically recommends against using Dexron VI in non-GM made vehicles that used Dexron III as original equipment.
What is the best Dexron VI?
| # | Product | |
|---|---|---|
| 1 | ACDelco GM Original Equipment 10-9395 Dexron VI Automatic Transmission Fluid – 1 gal | Buy on Amazon |
| 2 | Valvoline DEXRON VI/MERCON LV (ATF) Full Synthetic Automatic Transmission Fluid 1 QT | Buy on Amazon |
| 3 | Amalie (160-72876-56-12PK DEXRON-VI Automatic Transmission Fluid Case 1 Quart, (Pack of 12) | Buy on Amazon |
What color is Dexron 6 fluid?
Property
| Property | |
|---|---|
| Color, Visual | Red |
| Density @ 15 C, g/ml, ASTM D4052 | 0.8292 |
| Flash Point, Cleveland Open Cup, °C, ASTM D92 | 220 (428) |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 5.83 |
Is Dexron 3 the same as mercon?
Dexron III and Mercon V are similar types of automatic transmission fluid, with the main difference being that Dexron is the formula developed by General Motors, while Mercon was created by Ford. Dexron III was released in 1993 and was designed to be compatible with all older GM models.
What is the best transmission fluid?
The best transmission fluid is the Mobil 1 112980 Synthetic ATF, which promotes excellent lubrication, smooth shifting, cooler operating temperatures and long life. Some of the first automatic transmissions used motor oil as the lubricant but that is not suitable for todays complex transmissions.
Is Dexron 3 synthetic?
ATF Dexron III is a synthetic based automatic transmission fluid with extended drain capabilities. The product incorporates a well balanced friction modifier package whilst the synthetic base stocks provide outstanding inherent oxidation stability. Minimum power loss and consistent performance are ensured for the life of the fluid.
Does Dexron VI replace Dexron III?
Dexron III (H) and Dexron III/Saturn are upgrades to Dexron III fluids, and Dexron VI became the official replacement to Dexron III. Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids.
What are the types of automatic transmission fluid?
Automatic transmission fluid cools the transmission components and allows for smooth transfer of power to the transmission for proper function. Different car makes and models require various types of automatic transmission fluid. Two common types are Dexron and Mercon.