At what temperature should the Accu Chek Inform II strips be stored?
Store the test strips at temperatures between 39–86 °F (4–30 °C). Do not freeze.
What is the proper procedure for placing the test strip?
Hold your finger to the tip of the strip until the yellow window is completely filled with blood. The blood will be drawn into the strip automatically. If audible sound is turned on, meter will beep to let you know the test has begun.
When should high and low quality control test be completed?
Quality Control Testing When to perform Quality Control Tests: 1. Every 24 hours of patient testing. Meters are programmed to lock out after 24 hours and will not allow testing to be done until both High and Low controls are successfully tested.
What is measured with the Accu-Chek Inform II system?
Assessment: The technology used in the Roche Accu-Chek Inform II, to measure blood glucose, is among the best rated for accuracy by Medaval Ltd. It has passed in clinical validation studies, between general and specific populations, according to recognised standard protocols, as published in peer-reviewed publications.
How high and low do Accu-Chek Inform II meters read?
Accu-Chek Inform II Glucose Control Solutions, Roche Diagnostics, Two Levels Level 1 (Low) and Level 2 (High). 1. Store at room temperature at 39-86 °F (4-30° C). Do not freeze.
What product should be used for cleaning and disinfecting the Inform II?
Approved cleansing agents – Clorox® Germicidal Wipes. Refer to Point of Care Devices – Cleaning/Disinfecting Guide.
Where do you store the Accu-Chek Inform II glucose meter?
Accu-Chek Inform II Test Strips, Roche Diagnostics 1. Store at room temperature between 39-86 °F (4-30 °C). Do not freeze.
When stored properly Accu-Chek Inform II test strips?
Accu-Chek Inform II Test Strips: a. Use strips at temperatures between 16°C and 35°C (61°F – 95°F) and between 10-80% relative humidity. c. Open test strips are stable until the manufacturer out-date printed on the vial when stored properly.
What is the testing range of the Accu-Chek Inform II meter?
Highlights of the Inform II System ✓ Sample size – 0.6 microliters and applied to FRONT EDGE TIP of strip ✓ Testing time – 5 seconds ✓ Linear range for meter is 0.6mmol/L-33.3mmol/L ✓ Use of second blood drop for testing ✓ Cleaning site with soap and water ✓ Strip must be in meter BEFORE testing.
What is the testing range of the Accu Chek Inform II meter?
How high and low do Accu Chek Inform II meters read?