Are there any left side indicators that work?
There are a few daffodil ones about. The left side indicators have always worked for me, although I am sure I know of someone this has happened to. Perhaps a mate or colleague.
How is the hazard light on and off?
The hazard light switch is not a simple on/off switch. In the “on” position, a fused battery feed connects to left and right turn signal. In the “off” position, the left turn switch wire is connected to the left turn lamp and the right turn switch wire is connected to the right turn lamp, so there are 3 inputs and 2 outputs.
When do hazard lights work and when do turn signals work?
Turn signals only work when the ignition is on; hazard lights work whether the ignition is on or not. The two systems have separate power supplies, so they have separate fuses.
What should I do if my light bulb is not working?
You’re lucky that you have one side working – instant test bed. Try swapping a bulb from one side to the other first – if the fault moves side then you’ve found your problem. If the indicators are easy to swap across then do this one at a time (or even just swap the wiring under the seat/behind the fairing).
The hazard light switch is not a simple on/off switch. In the “on” position, a fused battery feed connects to left and right turn signal. In the “off” position, the left turn switch wire is connected to the left turn lamp and the right turn switch wire is connected to the right turn lamp, so there are 3 inputs and 2 outputs.
Turn signals only work when the ignition is on; hazard lights work whether the ignition is on or not. The two systems have separate power supplies, so they have separate fuses.
Why is my front indicator light not working?
Swap the bulb first. If that dosent do it check you have power at the bulb holder. If not you just have to trace the wiring back, possibly the connector where the flasher joins the main harness is the fault. Failing all that a good local auto-electrician is your new best mate!! Checked the bulb and it’s not that.
What should I do if my front light bulb is not working?
The connection between the front lighting loom and the main loom is at a multi-pin connector in front of the front wheel. It’s an interior grade connector and corrodes like mad under those conditions. If the bulb is OK and you don’t have power to the bulb holder, that’s where I’d look. that’s where I’d look.