Why wont my indicators stay on?
Turn the indicator stalk to the left-hand turn position. If the circuit tester illuminates, the wiring to and inside the switch are okay. If the circuit tester fails to light, it indicates a fault either in the switch itself or in the wiring between the switch and the multi-plug.
What causes the indicator stalk to turn to the left?
What to do if your indicator stalk is beyond repair?
If the stalk appears beyond repair check with your local main dealer to find out whether any component parts are available. The vast majority of switch/stalk assemblies however are only available as a complete unit and they are often quite expensive to buy new. It is worth trying at a local breaker’s yard to find a replacement switch.
How do you disconnect an indicator stalk on a car?
Before carrying out any work on the stalk disconnect the battery leads as a safety precaution against short circuits . On the majority of cars you have only to remove the steering column shroud to gain access to the indicator stalk switch mechanism.
What does it mean when your indicator light fails?
If the circuit tester illuminates, the wiring to and inside the switch are okay. If the circuit tester fails to light, it indicates a fault either in the switch itself or in the wiring between the switch and the multi-plug.
What to do if your indicator stalk is not working?
On older stalk assemblies it is usually possible to clean up the contacts of the assembly with fine grade wet-or-dry paper or a small nail file. Operate the switch and take a closer look at the contacts to see how they work. You may find that they don’t touch properly – if this is the case, bend the switch contacts so they make a better connection.
When do I Turn left the turn signal will not turn off?
When I’m turning left and activate the turn signal, and complete the turn the signal will turn off. However, when I’m turning right and activate the turn signal, and complete the turn the signal will not turn off.
How are the wires attached to an indicator stalk?
Refer to the wiring diagram in your service manual to identify the indicator wires. There are usually three wires attached to the indicator switch: one feed wire to the switch and two wires leading from it to feed the right- and left-hand circuits . Look carefully to make sure none of the wires has fallen off or broken.
Why do my indicators cancel when I turn the steering back?
Not open for further replies. Hi- just replaced the indicator stalk/arm on a Corsa C, and the indicators still don’t cancel when you turn the steering back to straight.