Why is my Honda CRV not blowing hot air?
While there are a variety of reasons your Honda CR-V heater is not working, the most common 3 are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor.
Why does my Honda CRV cabin heater not work?
I’ve a 2007 new shape CRV. The cabin heater has stopped blowing warm air, the a/c works fine but just cold blows when I turn the heat up. I’ve check he fuses they all look ok, the fluid level is ok. I’m not sure what else to check. Its probably a blend door actuator. This is a motor that moves a door.
How can I test my Honda CRV heater?
You can test the motor itself by applying power to pin 1 and ground to pin 2 of the air mix control motor. This should turn the motor to full heat. If you ground pin 1 and supply power to pin 2, the motor should turn to full cold. Do NOT confuse pins 1 and 2 for pins 6 and 7.
Why are the vents on my Honda Civic not working?
If you turn on the air or heat the but the vents down blow, there is a flap actuator that controls the vents in the car that is burned out. This fixed my 98 honda civic problem. Category Autos & Vehicles Show moreShow less Loading… Advertisement AutoplayWhen autoplay is enabled, a suggested video will automatically play next.
How to troubleshoot blend actuator without climate control?
NOTE: Before testing the motor, check for HVAC DTCs See: Heating and Air Conditioning > Initial Inspection and Diagnostic Overview > How To Troubleshoot The Heating And A/C Systems (Without Climate Control). 1. Disconnect the 7P connector from the air mix control motor.
I’ve a 2007 new shape CRV. The cabin heater has stopped blowing warm air, the a/c works fine but just cold blows when I turn the heat up. I’ve check he fuses they all look ok, the fluid level is ok. I’m not sure what else to check. Its probably a blend door actuator. This is a motor that moves a door.
Is the Honda CRV air conditioner blowing cold?
It is entirely possible for your CR-V’s heater to work just fine even when the air conditioner is not blowing cold at all. That’s why troubleshooting the air conditioner is totally different than troubleshooting the heater.
You can test the motor itself by applying power to pin 1 and ground to pin 2 of the air mix control motor. This should turn the motor to full heat. If you ground pin 1 and supply power to pin 2, the motor should turn to full cold. Do NOT confuse pins 1 and 2 for pins 6 and 7.
Where can I find a replacement actuator for my car?
These repairs can take a little longer because more parts need to be removed to gain access to the actuator. You can use a repair resource such as Mitchell1, a paper manual found on Amazon or a resource like Google images to locate the particular area in which the actuator needs to be replacement.