Who bought MAAX Spas?
the American Bath Group
We continued to be under Brookfield until January 2017, when both MAAX Spas and MAAX Bath were acquired by the American Bath Group, who owns us today. We’re still known as MAAX Spas, but we are now a division of American Bath Group.” Today, MAAX Spas employs about 220 people, with 202 in Chandler.
How do you clean a Maax Spa?
104°F/40°C) up to two inches (5 cm) above the jets; add the cleansing agent (either whirlpool piping cleaner or 2 cups of dishwasher powder), and turn the whirlpool system on for 10 minutes. Empty the bathtub. Use cold water to rinse, turning the system back on for 10 minutes, while keeping the air controls turned off.
What does Flo mean on my hot tub?
water flow
If you have a Hot Tub FLO Error Code, this usually means there is an issue with water flow in your hot tub.
What is error code E04 on lazy spa?
Is there an E04 error code displaying on your Lay-Z-Spa pump? This means your Lay-Z-Spa pump is experiencing a heating issue. Remove the pump from the liner by placing the stopper caps on the inside over the debris screens. Take the spa pump off and place this in a cool area or inside.
Where are MAAX hot tubs made?
Today, MAAX, part of American Bath Group (ABG), has eight production facilities in North America, of which four are located in Canada, and employs nearly 1,400 people, including 630 in Québec.
What are MAAX tubs made of?
cast acrylic
MAAX uses high-quality cast acrylic that is thick, strong and durable. Our high-quality cast acrylic has a soft, luxurious feel that is warm to the touch and retains heat, such as the heat of the bathwater.
How do I clean the jets in my tub?
How To Clean Bathtub Jets with Basic Household Ingredients
- Fill the tub until the jets are covered by 2-3 inches of hot water.
- Add 2 Tablespoons of a low-sudsing dishwashing liquid and 1/2 cup of bleach.
- Run the tub’s jets for 15 minutes.
- Empty the tub, and refill it (cold water is fine this time).
What does PR mean on Beachcomber hot tub?
priming mode
Beachcomber Hot Tub Error Codes
| Message | Meaning |
|---|---|
| Pr | This happens when the hot tub unit is actuated for the first time; eventually it goes into priming mode |
| –F / –C | Means unknown temperature. |
| Std/ St STANDARD | Means hot tub unit is functioning in Standard Mode. |
| Ecn/ Ec ECONOMY | Means hot tub unit is functioning in Economy mode. |
Where is the pressure switch on a Beachcomber hot tub?
The Pressure Switch on a hot tub or spa is a pressure sensor that is mounted onto the heater housing, or very close to the exit point of the heater. It’s sole purpose is to shut off the heater if low pressure (low water flow) occurs.
Where is the serial number on a Maax spa?
The serial number is located in the lower right corner of the equipment access panel on the front of the spa. PLEASE FILL IN THE INFORMATION BELOW
Where is the amperage plug on a Maax spa?
The equipment is located (in most cases) at the front of the spa and will need to be accessible for service and power connection. In most cases appropriate amperage cord and plug will be provided running from the back of your spa.
Is the l.a.spas owner’s manual accurate?
Every effort has been made to ensure the accuracy of this owner’s manual, however, L.A. Spas reserves the right to modify and improve the product without notice. This may create minor variations between this manual and your spa. If you have any questions regarding your spa or the owner’s manual, please contact your authorized L.A. Spas dealer.