Where to get a new Jeep Grand Cherokee engine control computer?

You expect your vehicle to always perform at its best, so get a new Jeep Grand Cherokee engine control module to ensure that the information collected by your Jeep’s sensors is properly interpreted by your engine. Order from AutoZone online and enjoy home shipping or choose Same Day Store Pickup to get the job finished before the sun sets.

What to do if your Jeep PCM is not working?

As an experienced Electronics Engineer, I have gone the extra step and added the use of a deoxidizer on the connectors, which will protect the connections as well as increase their electrical integrity. I have personally used this cure myself on several Jeeps having been a longtime Jeeper with myfirst being a 76 Cherokee S.

Where can I buy a new Jeep Cherokee?

Buy Online. Pick Up In-Store. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only With the rugged good looks of a vehicle that’s capable of great things, your Cherokee goes proudly wherever you want it to.

Why are my Jeep PCM screws too long?

Some units have come frome the factory with screws that were too long, and eventually due to vibration shorted the unit out. I replace them with shorter sheet metal screws as standard operating procedure to avoid this issue, since I never ran into this personally.

What is the diysave10 code for Jeep Grand Cherokee?

Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Thanks to your Grand Cherokee, you’re able to get off the beaten path while still traveling in comfort and style.

Are there aftermarket parts for the Jeep Grand Cherokee?

Aftermarket parts are commonly available. OEM Grand Cherokee products are factory-produced for use in Jeep vehicles, but they are sold under another label, such as Mopar4All. Both aftermarket and OEM are great sources of quality replacement parts designed for used in your Jeep Grand Cherokee.

Is there a no start Jeep Grand Cherokee?

I have a 2000 Jeep Grand Cherokee with a 4.0L with a no start, no spark condition. I also have a fuel and voltage gauge that is NOT reading correctly, however I did do a gauge check, hold in the trip reset and turn the key on and they all worked.

Why does my Jeep Grand Cherokee not have a PCM?

One common problem that affects Jeep PCMs – particularly PCMs for the Jeep Grand Cherokee – is poor soldering on the 5-volt power connection. If all other tests have failed, you can try re-flowing the solder. We’ll go over this process in the next section.

Why is my 2008 Jeep Grand Cherokee not turning over?

Have had to jump start 4 times and carry a portable starter with me. 2008 Grand Cherokee began experiencing intermittent starting problems. Without warning the vehicle would not turn over. All dash lights were working. As well as radio, AC, power windows and all other electrical systems. No codes showed on the computer.

What to do if your Jeep Grand Cherokee won’t start?

When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Grand Cherokee, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it.

What should my CPS be on my Jeep Cherokee?

Your meter should show a CPS resistance of between 125 – 275 Ohms. . If the CPS is out of that range by much, replace it. Test # 2 – You’ll need a helper for this one. Set the volt/ohm meter to read 0 – 5 AC volts or the closest AC Volts scale your meter has to this range.

When did I Buy my 2008 Jeep Grand Cherokee?

I bought my biggest problem to date, my 2008 Jeep Grand Cherokee Diesel, September 17, 2013. This vehicle has caused me nothing but problems, thousands of dollars and has been a major headache since I bought it. On Nov 14, 2016 I had it in for service and that evening I was rear ended on the highway.

Is there an online assessment for the Cherokee Nation?

The Cherokee Nation is launching an online assessment program and investing $4 million to help Cherokee homeowners living in the reservation repair plumbing problems caused by the February 2021 winter storm event. The new online assessment is now available at https://zfrmz.com/FhWNwtxWVYCUlEdzUAlh.

Who is the chief of the Cherokee Nation?

Principal Chief Chuck Hoskin Jr. and Deputy Chief Bryan Warner are proposing new legislation that would provide Cherokee citizens with access to substance abuse treatment centers, wellness centers and fitness centers by setting aside a portion of third-party revenues collected by Cherokee Nation Health Services each year.

How to contact the Cherokee Nation Health Center?

A call center (1-833-528-0063) has been established for tribal citizens who have questions about COVID-19. It is open from 8 a.m. to 5 p.m. Monday-Friday. If tribal citizens have symptoms like cough, fever or respiratory problems, they should contact their Cherokee Nation Health center first, before entering.

Do you have to program a new Jeep Grand Cherokee?

I have 2005 Jeep Grand Cherokee with a missmatch error, the history is it has had PCMs replaced a number of times as well as WCM, immobilizer and keys before l had purchased it, and l have had to replace all devices and now the cluster does not match.

How to order a 1996 Jeep Grand Cherokee?

Contact our customer service center for Sales or if you have any questions regarding your order! Call Toll Free: 1-866-699-5230 Mon-Fri 9AM to 6PM EST. 1996 Jeep Grand Cherokee PCM ECM ECU Engine Computer.

How to order a Jeep Grand Cherokee ECM engine?

Select your year Jeep Cherokee PCM ECM ECU Engine Computer and get back on the road ASAP. Don’t bargain shop for a part that you and your family depends on! Contact our customer service center for Sales or if you have any questions regarding your order! Call Toll Free: 1-866-699-5230 Mon-Fri 9AM to 6PM EST.

Where did the 2001 Jeep Cherokee come from?

1st owner purchased on 08/12/01 and owned in AZ until 07/13/10 • 2nd owner purchased on 07/13/10 and owned in AZ until 04/01/14 • 3rd owner purchased on 04/01/14 and owned in AZ until .

What kind of engine does a Jeep Grand Cherokee have?

Find out now. 2001 Jeep Grand Cherokee 4.0L 6 Cyl 4×4 ECU ECM Wire Harness OEM. 1 product ratings – 2001 Jeep Grand Cherokee 4.0L 6 Cyl 4×4 ECU ECM Wire Harness OEM.

What are the torque specifications of a Jeep Cherokee?

31.18 XJ – FRONT Brake Hose to Caliper Inlet Fitting Bolt Type: Bolt 27.12 XJ – Brake Pedel Pivot Pin Nut

What kind of drain plug does a Jeep Cherokee use?

XJ – Transfer Case Drain Plug Type: Bolt Head: Hexagon 20 240 27.12 XJ – MANUAL Transmission Drain Plug Type: Bolt Head: Hexagon Drive Shaft To Transfer Case Assembly 22 264 29.83 XJ – Driveshaft to Transfer Case Flange Bolts Type: Bolt Head: Hexagon Drive Shaft To Transfer Case Assembly 35 420 47.45 XJ – FRONT Universal Joint Flange Nut Type:

What kind of transmission does a Jeep Grand Cherokee have?

44RE: A four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee’s with 5.2L engines. 42RE: A four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

Is there a transmission computer for a jeep?

We carry Engine & Transmission Computers for All JEEP Model vehicles. Please call us if you do not see the part you need. If we don’t have it, it doesn’t exist.

What to do if your Grand Cherokee computer forgets hard codes?

Disconnect the negative battery cable and leave it disconnected overnight. Reconnect the negative battery cable in the morning and all but any hard codes will be cleared. By disconnecting the battery, you are essentially giving the computer a form of amnesia, whereby the computer forgets any stored codes.

When does the PCM generate a trouble code?

When the PCM detects a malfunction in the drive train or related systems, it will generate a trouble code that will remain until the problem is corrected or the code is cleared. In extreme cases, hard codes are generated, which can only be cleared with a proper scan tool, or by resetting the computer.

Where is the scan tool on a Jeep Grand Cherokee?

Connect the scan tool’s data cable to the data link connector (DLC) port. In most Jeeps, the DLC port is located next to the fuse panel under the driver’s side dash. Refer to the scan tool’s specific owner’s manual on how to run a self test on the PCM and clear the code.

Where can I get a replacement PCM for my Jeep?

If you have any questions about your PCM repair or replacement, contact us on our website, or call us at 888-848-0144. SoloPCMs specializes in automotive computers, and our technicians are always willing to share their expertise.

Which is the new Jeep Grand Cherokee Laredo X?

Tax, title and license extra. Lease example for 2021 GRAND CHEROKEE LAREDO E 4X2. Bold is the new black. The Grand Cherokee Laredo X offers the perfect balance of beauty and functionality with striking available gloss black exterior details and well-appointed interior comforts.

When did Jeep Grand Cherokee PCM connector come out?

You can find the 1996-1998 4.0L Jeep Grand Cherokee PCM connector pin-out charts here: PCM Pin Out Chart (1996-1998 4.0L Jeep Grand Cherokee).

We carry Engine & Transmission Computers for All JEEP Model vehicles. Please call us if you do not see the part you need. If we don’t have it, it doesn’t exist.

You can find the 1996-1998 4.0L Jeep Grand Cherokee PCM connector pin-out charts here: PCM Pin Out Chart (1996-1998 4.0L Jeep Grand Cherokee).

Where is the fuel injection connector on a Jeep Grand Cherokee?

1993, 1994, 1995 Jeep Grand Cherokee 60 Pin Connector (4.0L) The fuel injection computer (known in tech speak as the PCM = Powertrain Control Module) is located on the firewall (passenger side) of your Jeep Grand Cherokee.

What kind of security does a Jeep Grand Cherokee have?

Experience the freedom of complete confidence with Grand Cherokee safety and security systems. Equipped with over 70 standard and available advanced technologies, Grand Cherokee helps to keep you and your family safe and secure on journeys near or far.

What are the features of the Jeep Grand Cherokee?

The available Jeep® Advanced Active Safety Group includes active safety and security features that will help keep your vehicle a pre-set distance from the vehicle in front of you, help keep your vehicle within its lane and help you park more confidently.

How does the Jeep Grand Cherokee Park itself?

With the available Parallel and Perpendicular Park Assist, Grand Cherokee can practically park itself. Once it identifies a suitable parking space, the system directs the driver with audible instructions that also appear in the Driver Information Cluster Display.

Where can I buy a 1998 Jeep Grand Cherokee?

Description: Used 1998 Jeep Grand Cherokee Laredo with AWD/4WD. 4WD. 1998 Jeep Grand Cherokee Laredo Laredo 4WDAS IS VEHICLE SOLD OUT OF STATE CUSTOMER UNDERSTANDS THIS VEHICLE IS COMPLETELY OUT OF WARRANTY. CUSTOMER ALSO UNDERSTANDS THIS VEHICLE IS BEING SOLD WITH ABSOLUTELY NO WARRANTY OR GAURANTEE FROM HAGERSTOWN FORD.

What is the engine computer on a Jeep Grand Cherokee?

Refresh your engine computer for better Jeep Grand Cherokee gas mileage and overall efficiency. Engine computers, or engine control modules (ECM), are the electronic workhorses beneath your hood, controlling actuation, combustion, and power delivery. Here are five questions and answers to help demystify this valuable but complex automotive part.

Where is the fuel injection computer on a Jeep Grand Cherokee?

The fuel injection computer (known in tech speak as the PCM = Powertrain Control Module) is located on the firewall (passenger side) of your Jeep Grand Cherokee.

Where can I buy a Jeep Grand Cherokee?

OEM Grand Cherokee products are factory-produced for use in Jeep vehicles, but they are sold under another label, such as Mopar4All. Both aftermarket and OEM are great sources of quality replacement parts designed for used in your Jeep Grand Cherokee. What does “programmed plug and play” mean?

Is there a problem with my Jeep Grand Cherokee?

Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.

What’s the Flash code on my Jeep Grand Cherokee?

Code 26 – Governor Pressure Sensor Offset Drift Code 55 – End of Message You may or may not be skilled enough to actually fix the problems indicated by the flash codes yourself, but you’re better-armed with an understanding of where the issues lay as you seek help from a mechanic.

How can I tell if my Jeep Grand Cherokee is shifting?

Turn ignition key ON and OFF three times, finally leaving the key in the ON position. Leave the Overdrive Off Switch in the normal overdrive (ON) position. Immediately begin counting the number of flashes displayed by the Overdrive Off Switch indicator lamp. There will be two sets of flashes, separated by a pause.

Is the engine control module 4.0 for a Jeep Wrangler?

Jeep Wrangler 4.0 engine computer for 91-95 standard Wranglers and 91-93 automatics. This computer is tested and guaranteed. It will actually work in all 6 cyl Wranglers but…

How to troubleshoot a no start Jeep 4.0L?

More specifically, this means that troubleshooting the problem requires that you check and confirm that: All 6 cylinders are getting spark (with a spark tester). That the fuel pump is creating enough fuel pressure. And if necessary, check the engine’s health with a compression test. I’ll go into more specific details in the following headings: 1.)

What’s the difference between ECM and PCU in a jeep?

The Jeep Engine Control Module, known as the PCM ( Powertrain Control Module) ECU ( Electrical Control Unit ) or to simply it put the Automotive Engine Computer . Confusing right? If you would like to know more about their differences you can read up on our previous post ” Difference between ECM, ECU & PCM ” which we covered it in details.

Where to buy a new Jeep Wrangler engine control computer?

Get a new one by shopping online with AutoZone and choose from Same Day Store Pickup or home shipping.

How to reset your Jeep engine control module?

3- Once the time has passed you should now turn the headlights “on” and “off” twice to drain the Engine Control Module from any remaining power. 4- Now plug back in the negative terminal and your Jeep ECM should now be reset. To finish off this post , here are a couple of things you should keep in mind.

Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Thanks to your Grand Cherokee, you’re able to get off the beaten path while still traveling in comfort and style.

Do you need to replace engine control module in Jeep Grand Cherokee?

Both capable and attractive, you’re Grand Cherokee is able to take you across country or cross-town. A vehicle like yours deserves to always function to the best of its ability, so pay attention for signs that you need to replace your Jeep Grand Cherokee engine control module.

Navigation