Where is the valve adjuster on a Kawasaki Bayou 300?
Pull the fuel hose off the valve outlet using pliers. Unscrew the mounting bolt from the base of the fuel tank using a 12 mm socket. Lift the fuel tank off the ATV. Remove the valve adjuster cap, located on the front and rear of the engine cylinder head using a 10 mm socket. Remove the guard plate from the left engine cover using a 10 mm socket.
What kind of engine does a Kawasaki Bayou 300 have?
Kawasaki’s Bayou 300 ATV is powered by a single-cylinder, two-valve engine. During normal operation, a set of rocker arms push down on the valves, allowing fuel to enter while forcing exhaust gases out.
What should the air gap be on a Kawasaki Bayou 300?
Ideally, there should be a 0.003- to 0.005-inch air gap between the valve stem and the rocker arm. Additionally, the feeler gauge should be able to move between the valve and the rocker arm with a slight drag. Loosen the adjuster locknut on the top of the rocker arm using an 8 mm box-end wrench.
Where is the feeler gauge on a Bayou 300?
Slip a feeler gauge between the intake valve stem, located at the top of the valve, and the rocker arm. Ideally, there should be a 0.003- to 0.005-inch air gap between the valve stem and the rocker arm. Additionally, the feeler gauge should be able to move between the valve and the rocker arm with a slight drag.
Pull the fuel hose off the valve outlet using pliers. Unscrew the mounting bolt from the base of the fuel tank using a 12 mm socket. Lift the fuel tank off the ATV. Remove the valve adjuster cap, located on the front and rear of the engine cylinder head using a 10 mm socket. Remove the guard plate from the left engine cover using a 10 mm socket.
Kawasaki’s Bayou 300 ATV is powered by a single-cylinder, two-valve engine. During normal operation, a set of rocker arms push down on the valves, allowing fuel to enter while forcing exhaust gases out.
Are there any parts for a Kawasaki Bayou?
Only 8 left in stock – order soon. . Only 4 left in stock – order soon. . Cyleto Starter Solenoid Relay for Kawasaki BAYOU 220 KLF200 1988-2002ATV/BAYOU 250 KLF250 2003-2010 ATV/KLX650 KLX 650 1993-1996/VN800 VULCAN 800 1996-2005/HONDA VT750C Shadow 2000/SUZUKI GSXR750 1993
Are there any Kawasaki Bayou 12V Relays left?
Road Passion Starter Solenoid Relay 12v for KAWASAKI BAYOU 220 KLF220 1988-2002 BAYOU 250 KLF250 2003-2010 ATV KLX650 1993-1996/VN800 VULCAN 800 1996-2005/SUZUKI GSXR 750 1993/HONDA VT750C Shadow 2000 . . . Only 1 left in stock – order soon. . Only 13 left in stock – order soon. . Only 1 left in stock – order soon. .
How often should I Reset my Bayou 300?
Bayou 300 2×4 or 4×4 valve settings. Most people reset the valves at least once a year. Hours are not a good indicator by which to reset the valves, as when they set around for extended periods the valve seats and faces tend to corrode and then when used they clear the corrosion and the valves need adjustment.
Ideally, there should be a 0.003- to 0.005-inch air gap between the valve stem and the rocker arm. Additionally, the feeler gauge should be able to move between the valve and the rocker arm with a slight drag. Loosen the adjuster locknut on the top of the rocker arm using an 8 mm box-end wrench.
How do you remove gas cap from Kawasaki Bayou 300?
Remove the screws attaching the sides of the front fender to the foot well panels using a Phillips-head screwdriver. Remove the front fender mounting bolts using a 10 mm socket and a Phillips-head screwdriver. Unscrew the gas cap, then lift the front fender off the ATV. Screw the gasp cap onto the fuel tank.