Where is the dipstick on a Porsche 911?
The level is now viewed on the dipstick, (located in the rear of the engine compartment-inside the oil tank on cars through ’89). The oil level must not be higher than half way between and minimum and maximum mark.
How do you check the oil level in a Porsche?
After filling the engine with engine oil, the oil level must be measured using the on-board computer (confirmation check). If the confirmation check is not carried out, the “Check oil level” warning message will still be displayed.
What kind of oil level does a Porsche Boxster have?
This TSB applies to 2009-2011 Porsche Boxster, Boxster S, Cayman, Cayman S, 911 Carrera, 911 Carrera S and 911 Turbo. Porsche reports that they have discovered that engine oil level sensors are increasingly being replaced, but in subsequent tests carried out by the manufacturer, these oil level sensors are found to be functioning correctly.
What should oil level be after oil change?
Bought oil and parts for about£100. Bought the genuine parts did the change and filled with 7.4l of 0W40 Mobil 1. Handbook says 7.5 l approx as fill capacity after change. Decided its easy to add more to correct level than remove it.
How is the oil level measured on a car?
Before the oil level is measured, the engine oil has to have flowed back into the oil pan. The time taken for the engine oil to flow back depends on the engine temperature and how long the engine has been stopped. This waiting time is counted down in the on-board computer display when the ignition is switched on.
How much oil does a Porsche Carrera take?
The 8.75 liters (9.25 quarts) in the DIY comes from the Porsche Carrera Service Manual. This section was updated in the service manual in 2001 – the last year of 3.4 liter engine. I always put in 9 quarts when I change my oil – as this puts me well within the marks.
What’s the oil capacity on a Porsche 996?
Then a few years later a bulletin came out that retroactively made it 8.75 liters or 9.25 quarts. Porsche changed oil fill capacities somewhere along the line during 996 production due to the cars smoking during turns. There is a technical bulletin somewhere detailing the specifics.
How do I check the oil level on my 987?
Measurement will be stopped if the above requirements are not met. Start oil level measurement in the “OIL“ menu in the on-board computer. Start oil level measurement by switching on the ignition. A failure of the oil level display is indicated by a warning message in the on-board computer.
Where do I find the oil level on my car?
When the ignition is switched on, the engine oil level is shown on the segment display. Measurement will be stopped if the above requirements are not met. Start oil level measurement in the “OIL“ menu in the on-board computer.