Where is the clutch pedal switch?
The clutch switch is normally located underneath the dash, and prevents you from starting the vehicle to start while it is in gear. The clutch switch is attached to the pedal linkage and is activated by the clutch pedal arm when the clutch is pushed down.
What is clutch pedal switch?
The clutch switch, also known as a clutch sensor, is a safety device on most modern manual transmission vehicles. Its purpose is to prevent the engine from starting while the vehicle is in gear. The switch is normally mounted on the clutch pedal, but it may also be located on the clutch master pushrod.
What happens when the clutch pedal is in the up position?
When the clutch pedal is in the up position, the clutch switch is normally open with no power to the ignition switch. When pushing down on the clutch pedal, the clutch switch closes the circuit to the ignition switch allowing the starter to the engine to engage.
Where is the clutch switch on a car?
On the back side of the clutch pedal you will find the clutch switch. Step 2: Check for drag. Pull up on the clutch pedal and push in the rod that sticks out of the switch that make constant contact to the clutch pedal. There should be no drag on the rod movement. Step 3: Check the wires to the clutch pedal.
How can I tell if my clutch switch is failing?
There are two ways to determine if the clutch switch is failing or has failed. First, the contacts inside the clutch switch have corroded or burned and will not make a connection to complete the circuit from the clutch switch to the ignition switch.
How to check the clutch in a Fiesta ST?
NOTICE: Make sure that fluid level is to the MAX mark. Start the engine. Check the operation of the clutch. If reverse gear engagement is excessively noisy, operate the clutch pedal 5 times, using the full clutch pedal travel. After waiting approximately 30 seconds, check the operation of the clutch again.